S0186-TRPV3GET1C000E2G Datasheet, PDF (4/5 Pages) OPLINK Communications Inc. – 1310nm Single Channel Optical Transmitter

TRPV3GET1C000E2G
Interfacing the Transceivers
Communication is via a serial 2-wire serial interface. As described in the document SFF-8472 (REV. 9.4) there are two distinct address spaces:
Byte Address
0 – 95
96 – 127
128 – 255
Base Address A0(hex)
Content
Serial Transceiver ID as defined in SFP MSA
OPLINK Specific
Reserved
Base Address A2(hex)
Byte Address
Content
0 - 55
Alarm & Warnings thresholds & limits
56 - 95
External calibration constants (not used)
96 – 119
Values from real time diagnostic monitoring
120 – 127 Not used
128 – 247 Customer specific, writable area
248 - 255 Not used
Application Schematics
Vcc
3.3V
1µH coil or ferrite bead
(<0.2Ω series resistance)
+ ₁₀
0.1
16
0.1
TX Disable
TX DATA IN+
TX DATA IN-
50Ω line
50Ω line
SFP ⁵
20
6
18
19
1, 4, 7, 11, 14, 17
Vcc
3.3V
RR
I²C CLK
I²C DATA
R: 4.7 to 10kΩ
CAP Values in µF
No Connection: 2, 3, 8, 9, 10, 12, 13, 15
Laser Safety:
All transceivers are Class I Laser products per
FDA/CDRH and IEC-60825 standards. They
must be operated under specified operating
conditions.
Oplink Communications, Inc
Oplink Communications, Inc.
DATE OF MANUFACTURE:
This product complies with
21 CFR 1040.10 and 1040.11
Meets Class I Laser Safety Requirements
4
S0186. Rev.03. (web) 2012-05-08