S0252-TPD1XGKZRXXG Datasheet, PDF (2/9 Pages) OPLINK Communications Inc. – DWDM 80km SFP+ Transceiver

TPD1XGKZRxxG
Transmitter Performance Characteristics (Over Operating Case Temperature. V_CC = 3.13 to 3.47V)
Parameter
Symbol
Minimum
Typical
Maximum
Data Rate
B
Center Wavelength ¹
λ_C
Average Optical Output Power
PAvg
Extinction Ratio
ER
Relative Intensity Noise
RIN
Side Mode Suppression Ratio
SMSR
Optical Return Loss Tolerance
-
Optical Output Eye
1 _{BOL : ±0.05nm from ITU grid; EOL: ±0.1nm from ITU grid.}
-
10.3125
-
See Ordering Information Table
0
-
+5
8.2
-
-
-
-
- 128
30
-
-
-
-
- 21
Compliant with IEEE 802.3ae
Units
Gb/s
nm
dBm
dB
dB/Hz
dB
dB
Receiver Performance Characteristics (Over Operating Case Temperature. V_CC = 3.13 to 3.47V)
Parameter
Data Rate
Wavelength of Operation
Receiver Sensitivity @ 10.3125Gb/s ¹
Receiver Sensitivity with 80km Fiber@10.3125Gb/s ¹
Maximum Input Optical Power (10 ^-12 BER)
Receiver Reflectance
LOS Hysteresis
LOS Thresholds
Increasing Light Input
Decreasing Light Input
1 _{Specified with BER <1x10}-12 _{and PRBS 2} 31_-1.
Symbol
B
λ
P_{min_BB}
P_{min_Fiber}
Pmax
-
-
Plos+
Plos-
Minimum
-
1530
-
-
-8
-
0.5
-
- 38
Typical
10.3125
-
-
-
-
-
-
-
-
Maximum
-
1565
- 23
- 20
-
- 27
-
- 25
-
Units
Gb/s
nm
dBm
dBm
dBm
dB
dB
dBm
Note: The specified characteristics are met within the recommended range of operation. Unless otherwise noted typical data are quoted at nominal voltage and
+25°C ambient temperature.
Laser Safety:
All transceivers are Class I Laser products per
FDA/CDRH and IEC-60825 standards. They
must be operated under specified operating
conditions.
Oplink Communications, Inc.
DATE OF MANUFACTURE:
This product complies with
21 CFR 1040.10 and 1040.11
Meets Class I Laser Safety Requirements
Oplink Communications, Inc
2
S0252. Rev.04. (web) 2012-08-08