TXP3XGGI2X Datasheet, PDF (1/6 Pages) OPLINK Communications Inc. – Multi-rate 10-Gigabit 40km XFP Transceivers

Multi-rate 10-Gigabit 40km XFP
Transceivers with Digital Diagnostics
TXP3XGGI2x
Pb
Product Description
The TXP3XGGI2x XFP multi-rate fiber optic transceivers with digital diagnostics
monitoring functionality provide a quick and reliable interface for 10Gbps
applications. The diagnostic functions, alarm and warning features as described
in the XFP Multi-Source Agreement (MSA) are provided via standard I²C serial
interface. The transceivers are compliant with the XFP Multi-Source Agreement
and are designed to support SONET/SDH, 10G Ethernet, 10G Fiber Channel and
FEC data rates from 9.95Gb/s to 11.09Gb/s. 8.5Gb/s is supported through Data
Rate Selection feature
Each transceiver utilizes a 1550nm electro-absorption modulated laser with a
PIN receiver to support up to 40km 10G applications. The transceivers satisfy
Class I Laser Safety requirements in accordance with the U.S. FDA/CDRH and
international IEC-60825 standards.
The transceivers connect to standard 30-pad XFP connectors for hot plug
capability. This allows the system designer to make configuration changes or
maintenance by simply plugging in different types of transceivers without
removing the power supply from the host system.
The transmitter and receiver DATA interfaces are AC coupled Current Mode
Logic (CML). LV-TTL Transmitter Disable control input and Loss of Signal output
interfaces are also provided.
The transceivers operate from +3.3V and +5.0V power supplies over a
operating case temperature range of -5°C to +70°C (Commercial), -5°C to +85°C
(Extended), or -40°C to +85°C (Industrial).
Features
 Lead Free Design & Fully RoHS Compliant
 Compliant with XFP MSA
 Support 9.95Gb/s to 11.09Gb/s Data Rates
 Support 8.5Gb/s Fiber Channel Application
 Digital Diagnostics Monitoring
 Temperature-stabilized EML Transmitter
 Low Power Consumption
 Wide Case Operating Temperature Range
 Transmission Distance up to 40km
Absolute Maximum Ratings
Parameter
Storage Temperature Range
Case Operating Temperature ¹
Commercial
Extended
Industrial
Supply Voltage
Operating Relative Humidity ²
Input Voltage
1 _{Case temperature is measured on top side of XFP module.}
2 _{Non condensing}
Symbol
T_ST
T_OP
V_CC 3
V_CC 5
RH
V_IN
Minimum
- 40
-5
-5
- 40
- 0.2
- 0.2
0
0
Maximum
+ 85
+ 70
+ 85
+ 85
+ 3.6
+ 6.0
85
V_cc
Units
°C
°C
V
%
V
S0353. Rev.02 (web) 2013-02-21