TXP1XGHL2XX-0959 Datasheet, PDF (1/9 Pages) OPLINK Communications Inc. – Multi-rate 10-Gigabit DWDM 80km XFP Transceivers with Digital Diagnostics

Multi-rate 10-Gigabit DWDM 80km XFP
Transceivers with Digital Diagnostics
TXP1XGHL2xx
Pb
Product Description
The TXP1XGHL2xx DWDM XFP multi-rate fiber optic transceivers with digital
diagnostics monitoring functionality provide a quick and reliable interface
for 10Gbps DWDM applications. The diagnostic functions, alarm and warning
features as described in the XFP Multi-Source Agreement (MSA) are provided via
standard I²C serial interface. The transceivers are compliant with the XFP Multi-
Source Agreement and are designed to support SONET/SDH, 10G Ethernet, and
10G Fiber Channel data rates from 9.95Gb/s to 11.09Gb/s.
Each transceiver utilizes an electro-absorption modulator integrated laser with
an operating wavelength in full compliance with 100GHz (0.8nm) spacing
per the ITU-grid. The transceivers satisfy Class I Laser Safety requirements in
accordance with the U.S. FDA/CDRH and international IEC-60825 standards.
The transceivers connect to standard 30-pad XFP connectors for hot plug
capability. This allows the system designer to make configuration changes or
maintenance by simply plugging in different types of transceivers without
removing the power supply from the host system.
The transmitter and receiver DATA interfaces are AC coupled Current Mode
Logic (CML). LV-TTL Transmitter Disable control input and Loss of Signal output
interfaces are also provided.
The transceivers operate from +1.8V, +3.3V and +5.0V power supplies over a
operating case temperature range of -5°C to +70°C (Commercial), -5°C to +85°C
(Extended), or -40°C to +85°C (Industrial).
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature ¹
Commercial
Extended
Industrial
Supply Voltage
Operating Relative Humidity ²
Input Voltage
1 _{Case temperature is measured on top side of XFP module}
2 _{Non condensing}
Symbol
T_ST
T_OP
V_CC2
V_CC3
V_CC5
RH
V_IN
Features
 Lead Free Design & Fully RoHS Compliant
 Compliant with XFP MSA
 Compliant with OC-192/STM-64
 Compliant with ITU-T G.709
 Support DWDM 10G Ethernet Applications
 Support 10G Fiber Channel Applications
 Digital Diagnostics Monitoring
 Temperature-stabilized EML Transmitter
 Low Power Consumption
 Wide Case Operating Temperature Range
 Transmission Distance up to 80km
Minimum
- 40
-5
-5
- 40
0
- 0.2
- 0.2
0
0
Maximum
+ 85
+ 70
+ 85
+ 85
+ 2.0
+ 3.6
+ 6.0
85
V _CC
Units
°C
°C
V
%
V
An Oplink Company
21737-0959. Rev.07. 2010-05-11