|
TXP1XGHL2X-S0125 Datasheet, PDF (1/6 Pages) OPLINK Communications Inc. – Multi-rate 10-Gigabit XFP 80km Transceivers with Digital Diagnostics | |||
|
Multi-rate 10-Gigabit XFP 80km Transceivers
with Digital Diagnostics
TXP1XGHL2x
Pb
Product Description
The TXP1XGHL2x XFP multi-rate fiber optic transceivers with digital diagnostics
monitoring functionality provide a quick and reliable interface for 10Gbps
applications. The diagnostic functions, alarm and warning features as described
in the XFP Multi-Source Agreement (MSA) are provided via standard I2C serial
interface. The transceivers are compliant with the XFP Multi-Source Agreement
and are designed to support SONET/SDH, 10G Ethernet, and 10G Fiber Channel
data rates from 9.95Gb/s to 11.09Gb/s.
Each transceiver utilizes an 1550nm electro-absorption modulated laser with an
APD receiver to support up to 80km 10G applications. The transceivers satisfy
Class I Laser Safety requirements in accordance with the U.S. FDA/CDRH and
international IEC-60825 standards.
The transceivers connect to standard 30-pad XFP connectors for hot plug capability.
This allows the system designer to make configuration changes or maintenance
by simply plugging in different types of transceivers without removing the power
supply from the host system.
The transmitter and receiver DATA interfaces are AC-coupled Current Mode
Logic (CML). LV-TTL Transmitter Disable control input and Loss of Signal output
interfaces are also provided.
The transceivers operate from +1.8V, +3.3V and +5.0V power supplies over a
operating case temperature range of -5°C to +70°C (Commercial), -5°C to +85°C
(Extended), or -40°C to +85°C (Industrial).
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature 1
Commercial
Extended
Industrial
Supply Voltage
Operating Relative Humidity 2
Input Voltage
1 Case temperature is measured on top side of XFP module.
2 Non condensing
Symbol
TST
TOP
VCC2
VCC3
VCC5
RH
Vin
Features
ï¾ Lead Free Design & Fully RoHS Compliant
ï¾ Compliant with XFP MSA
ï¾ Compliant with OC-192/STM-64
ï¾ Compliant with IEEE802.3ae
ï¾ Compliant with ITU-T G.709
ï¾ Support 10G Fiber Channel Applications
ï¾ Digital Diagnostics Monitoring
ï¾ Temperature-stabilized EML Transmitter
ï¾ Low Power Consumption
ï¾ Wide Case Operating Temperature Range
ï¾ Transmission Distance up to 80km
Minimum
- 40
-5
-5
- 40
0
- 0.2
- 0.2
0
0
Maximum
+ 85
+ 70
+ 85
+ 85
+ 2.0
+ 3.6
+ 6.0
85
Vcc
Units
°C
°C
V
%
V
An Oplink Company
S0125. Rev.03. 2011.03.25
|
▷ |