TXP1XGGI2X-S0131 Datasheet, PDF (1/6 Pages) OPLINK Communications Inc. – Multi-rate 10-Gigabit XFP 40km Transceiverswith Digital Diagnostics

Multi-rate 10-Gigabit XFP 40km Transceivers
with Digital Diagnostics
TXP1XGGI2x
Pb
Product Description
The TXP1XGGI2x XFP multi-rate fiber optic transceivers with digital diagnostics
monitoring functionality provide a quick and reliable interface for 10Gbps
applications. The diagnostic functions, alarm and warning features as described
in the XFP Multi-Source Agreement (MSA) are provided via standard I²C serial
interface. The transceivers are compliant with the XFP Multi-Source Agreement
and are designed to support SONET/SDH, 10G Ethernet, and 10G Fiber Channel
data rates from 9.95Gb/s to 11.09Gb/s.
Each transceiver utilizes an 1550nm electro-absorption modulated laser with
a PIN receiver to provide link budget of 14dB for up to 40km applications. The
transceivers satisfy Class I Laser Safety requirements in accordance with the U.S.
FDA/CDRH and international IEC-60825 standards.
The transceivers connect to standard 30-pad XFP connectors for hot plug capability.
This allows the system designer to make configuration changes or maintenance
by simply plugging in different types of transceivers without removing the power
supply from the host system.
The transmitter and receiver DATA interfaces are AC-coupled Current Mode
Logic (CML). LV-TTL Transmitter Disable control input and Loss of Signal output
interfaces are also provided.
The transceivers operate from +1.8V, +3.3V and +5.0V power supplies over a
operating case temperature range of -5°C to +70°C (Commercial), -5°C to +85°C
(Extended), or -40°C to +85°C (Industrial).
Absolute Maximum Ratings
Parameter
Storage Temperature Range
Case Operating Temperature ¹
Commercial
Extended
Industrial
Supply Voltage
Operating Relative Humidity ²
Input Voltage
1 _{Case temperature is measured on top side of XFP module.}
2 _{Non condensing}
Symbol
T_ST
T_OP
V_CC2
V_CC3
V_CC5
RH
V_in
Features
 Lead Free Design & Fully RoHS Compliant
 Compliant with XFP MSA
 Compliant with OC-192/STM-64
 Compliant with IEEE802.3ae
 Compliant with ITU-T G.709
 Support 10G Fiber Channel Applications
 Digital Diagnostics Monitoring
 Temperature-stabilized EML Transmitter
 Low Power Consumption
 Wide Case Operating Temperature Range
 Transmission Distance up to 40km
Minimum
- 40
-5
-5
- 40
0
- 0.2
- 0.2
0
0
Maximum
+ 85
+ 70
+ 85
+ 85
+ 2.0
+ 3.6
+ 6.0
85
Vcc
Units
°C
°C
V
%
V
An Oplink Company
S0131. Rev.03. 2011.03.30