TXD3XGHL2XX Datasheet, PDF (1/9 Pages) OPLINK Communications Inc. – Multi-rate 10-Gigabit DWDM 80km XFP Transceiver

Multi-rate 10-Gigabit DWDM 80km XFP
Transceiver with Digital Diagnostics
TXD3XGHL2xx
Pb
Product Description
The TXD3XGHL2xx DWDM XFP multi-rate fiber optic transceivers with
digital diagnostics monitoring functionality provide a quick and reliable
interface for 10Gbps DWDM applications. The diagnostic functions, alarm
and warning features as described in the XFP Multi-Source Agreement
(MSA) are provided via standard I²C serial interface. The transceivers are
compliant with the XFP Multi-Source Agreement and are designed to
support SONET/SDH, 10G Ethernet, and 10G Fiber Channel data rates from
9.95Gb/s to 11.09Gb/s, and 8.5Gb/s through data rate selection feature.
Each transceiver utilizes an electro-absorption modulator integrated laser
with an operating wavelength in full compliance with 100GHz (0.8nm)
spacing per the ITU-grid. The transceivers satisfy Class I Laser Safety
requirements in accordance with the U.S. FDA/CDRH and international IEC-
60825 standards.
The transceivers connect to standard 30-pad XFP connectors for hot plug
capability. This allows the system designer to make configuration changes
or maintenance by simply plugging in different types of transceivers
without removing the power supply from the host system.
The transmitter and receiver DATA interfaces are AC coupled Current Mode
Logic (CML). LV-TTL Transmitter Disable control input and Loss of Signal
output interfaces are also provided.
The transceivers operate from +1.8V, +3.3V and +5.0V power supplies over
a operating case temperature range of -5°C to +70°C (Commercial), -5°C to
+85°C (Extended), or -40°C to +85°C (Industrial).
Features
 Lead Free Design & Fully RoHS Compliant
 Compliant with XFP MSA
 Compliant with OC-192/STM-64
 Compliant with IEEE802.3ae
 Compliant with ITU-T G.709
 Support 10G Fiber Channel Applications
 Digital Diagnostics Monitoring
 Temperature-stabilized EML Transmitter
 Low Power Consumption
 Wide Case Operating Temperature Range
 Transmission Distance up to 80km
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature ¹
Commercial
Extended
Industrial
Supply Voltage
Operating Relative Humidity ²
Input Voltage
1 _{Case temperature is measured on top side of XFP module.}
2 _{Non condensing}
Symbol
T_ST
T_OP
V_CC 3
V_CC 5
RH
V_IN
Minimum
- 40
-5
-5
- 40
- 0.2
- 0.2
0
0
Maximum
+ 85
+ 70
+ 85
+ 85
+ 3.6
+ 6.0
85
V _CC
Units
°C
°C
V
%
V
S0321. Rev.04. (web) 2014-03-21