TXC3XGJL2X Datasheet, PDF (1/7 Pages) OPLINK Communications Inc. – Transceivers with Digital Diagnostics

Multi-rate 10-Gigabit CWDM 70km XFP
Transceivers with Digital Diagnostics
TXC3XGJL2x
Pb
Product Description
The TXC3XGJL2x CWDM XFP multi-rate fiber optic transceivers with digital
diagnostics monitoring functionality provide a quick and reliable interface
for 10Gbps CWDM applications. The diagnostic functions, alarm and warning
features as described in the XFP Multi-Source Agreement (MSA) are provided
via standard I²C serial interface. The transceivers are compliant with the XFP
Multi-Source Agreement and are designed to support SONET/SDH, 10G
Ethernet, and 10G Fiber Channel data rates from 9.95Gb/s to 11.09Gb/s, and
8.5Gb/s through data rate selection feature.
Each transceiver utilizes an electro-absorption modulator integrated laser
with an operating wavelength selectable to ITU-T standards covering CWDM
grid wavelengths. The transceivers satisfy Class I Laser Safety requirements in
accordance with the U.S. FDA/CDRH and international IEC-60825 standards.
The transceivers connect to standard 30-pad XFP connectors for hot plug
capability. This allows the system designer to make configuration changes or
maintenance by simply plugging in different types of transceivers without
removing the power supply from the host system.
The transmitter and receiver DATA interfaces are AC coupled Current Mode
Logic (CML). LV-TTL Transmitter Disable control input and Loss of Signal output
interfaces are also provided.
The transceivers operate from +3.3V and +5.0V power supplies over a
operating case temperature range of -5°C to +70°C (Commercial), -5°C to +85°C
(Extended), or -40°C to +85°C (Industrial).
Absolute Maximum Ratings
Parameter
Storage Temperature
Case Operating Temperature ¹
Commercial
Extended
Industrial
Supply Voltage
Operating Relative Humidity ²
Input Voltage
1 _{Case temperature is measured on top side of XFP module.}
2 _{Non condensing}
Symbol
T_ST
T_OP
V_CC 3
V_CC 5
RH
V_IN
Features
 Lead Free Design & Fully RoHS Compliant
 Compliant with XFP MSA
 Compliant with OC-192/STM-64
 Compliant with ITU-T G.709
 Support 10G Ethernet Applications
 Support 10G Fiber Channel Applications
 Compatible with ITU-T G.695
 Digital Diagnostics Monitoring
 Temperature-stabilized EML Transmitter
 Low Power Consumption
 Distance up to 70km with G.652 Fiber
Minimum
- 40
-5
-5
- 40
- 0.2
- 0.2
0
0
Maximum
+ 85
+ 70
+ 85
+ 85
+ 3.6
+ 6.0
85
V _CC
Units
°C
°C
V
%
V
S0359. Rev.03 (web) 2014-02-17