TRXBG1LXDBBMH Datasheet, PDF (1/5 Pages) OPLINK Communications Inc. – Multi-rate Single Fiber Bi-Directional Gigabit Ethernet SFP Transceivers with Digital Diagnostics

TRXBG1LXM
Multi-rate Single Fiber Bi-Directional
Gigabit Ethernet SFP Transceivers with
Digital Diagnostics
Features
Pb
; Lead Free Design & Fully RoHS Compliant
; Compatible with SFP MSA
; Compliant with IEEE 802.3ah Draft 3.3 Gigabit
Ethernet 1000BASE-BX10 PMD Specifications
; Wavelengths of 1310nm, 1490nm and 1550nm
; Digital Diagnostics through Serial Interface
; Internal Calibration for Digital Diagnostics
; Distances up to 10km
; Eye Safe (Class I Laser Safety)
; Duplex LC Optical Interface
; Hot-pluggable
; TX Fault & Loss of Signal Outputs
; TX Disable Input
; Single +3.3V Power Supply
Description
The TRXBG1LXM modules are single fiber, bi-directional
SFP transceivers that provide a quick and reliable interface
for 1000BASE-BX10-D/U Gigabit Ethernet applications.
Three types of modules are available: the 1310nm Fabry
Perot laser-based transceiver (BX10-U), and the 1490nm
or 1550nm DFB laser-based transceivers (BX10-D). The
transceivers are designed to support data rates ranging from
1250Mb/s down to 125Mb/s and are integrated with digital
diagnostics monitoring, which provides features to detect
a problem before system performance is impacted. The
diagnostic functions, alarms and warning features are
provided via an I2C serial interface as described per the
Multi-Source Agreement (MSA) document, SFF-8472
(Rev. 9.4).
All modules meet Class I Laser Safety requirements in
accordance with the U.S. and international standards as
described in the FDA/CDRH and IEC-60825 documents,
respectively. The TRXBG1LXM transceivers connect to
standard 20-pad SFP connectors for hot plug capability.
This allows the system designer to make configuration or
maintenance changes by simply plugging in different types
of transceivers without removing the power supply from
the host system.
The transceivers have color-coded latches that identify the
TX wavelength. The MSA compliant latch offers an easy
and convenient way to release the module.
The transmitter and receiver DATA interfaces are AC-
coupled internally. LV-TTL Transmitter Disable control
input and Loss of Signal output interfaces are also provided.
The transceivers operate from a single +3.3V power supply
over an operating case temperature range of -5°C to +70°C
or -40°C to +85°C. The package is made of metal.
Absolute Maximum Ratings
Parameter
Symbol
Storage Temperature
T_st
Operating Case Temperature¹
Commercial
Industrial
T_op
Supply Voltage
V_CC
Input Voltage
V_in
Lead Terminal Finish, Reflow Profile Limits and MSL
-
1_{Measured on top side of SFP module at the front center vent hole of the cage.}
Minimum
- 40
-5
- 40
0
0
-
Maximum
+ 85
+ 70
+ 85
+ 4.5
V_CC
NA
Units
°C
°C
V
V
-
Optical Communication Products, Inc.
1
21737-0929, Rev. B
06-22-2006