|
TRPUG1CLXX000E2G Datasheet, PDF (1/6 Pages) OPLINK Communications Inc. – Multi-Rate Gigabit Ethernet & Fiber Channel SFP Transceivers | |||
|
Multi-Rate Gigabit Ethernet & Fiber Channel
SFP Transceivers with Digital Diagnostics
TRPUG1CLXx000E2G
Pb
Product Description
The TRPUG1-E2G SFP series of multi-rate fiber optic transceivers with
integrated digital diagnostics monitoring functionality provide a quick
and reliable interface for 1000BASE-LX Gigabit Ethernet and 1.062GBd
Fiber Channel applications. The transceivers are designed to support data
rates ranging from 1.25Gb/s down to 125Mb/s. The diagnostic functions,
alarm and warning features as described in the Multi-Source Agreement
(MSA) document, SFF-8472 (Rev. 9.4), are provided via an I2C serial
interface.
The transceivers use a 1310nm Fabry Perot laser and provides a minimum
optical link budget of 11dB, corresponding to a minimum distance of
10km, assuming fiber loss of 0.45dB/km. All modules satisfy Class 1
Laser Safety requirements in accordance with the U.S. FDA/CDRH and
international IEC-60825 standards.
The transceivers connect to standard 20-pad SFP connectors for hot plug
capability. This allows the system designer to make configuration changes
or maintenance by simply plugging in different types of transceivers
without removing the power supply from the host system.
The transceivers have bail-type latches, which offer an easy and
convenient way to release the modules. The latch is compliant with the
SFP MSA. Latches are colored-coded to indicate the different wavelength.
The transmitter and receiver DATA interfaces are AC-coupled internally.
LV-TTL Transmitter Disable control input and Loss of Signal (LOS) output
interfaces are also provided.
The transceivers operate from a single +3.3V power supply over operating
case temperature ranges of -40°C to +85°C (Industrial), -5°C to +70°C
(Commercial) or -5°C to +85°C (Extended) . The housing is made of metal
for EMI immunity.
Features
ï¾ Compliant with IEEE 802.3ah Gigabit Ethernet
1000BASE-LX PMD Specifications
ï¾ Compliant with SFP MSA
ï¾ Lead Free Design & RoHS Compliant
ï¾ Digital Diagnostics through Serial Interface
ï¾ Internal Calibration for Digital Diagnostics
ï¾ Distance Options to Support 10km
ï¾ Eye Safe (Class 1 Laser Safety)
ï¾ Duplex LC Optical Interface
ï¾ Loss of Signal Output & TX Disable Input
ï¾ Wide Operating Case Temperature Option
ï¾ Hot-pluggable
ï¾ Single +3.3V Power Supply
Absolute Maximum Ratings
Parameter
Symbol
Storage Temperature Range
TST
Commercial
Operating Case Temperature 1
Extended
TOP
Industrial
Supply Voltage
VCC
Input Voltage
VIN
1 Measured on top side of SFP module at the front center vent hole of the cage.
Minimum
- 40
-5
-5
- 40
0
0
Maximum
+ 85
+ 70
+ 85
+ 85
+ 3.47
VCC
Units
°C
°C
V
V
S0441, Rev.01. (web) 2014-05-05
|
▷ |