TRPU12XXXX000E2G Datasheet, PDF (1/5 Pages) OPLINK Communications Inc. – Multi-Rate OC-12/STM-4 SFP Transceivers

Multi-Rate OC-12/STM-4 SFP Transceivers
with Digital Diagnostics
TRPU12xxxx000E2G
Pb
Product Description
The TRPC12-E2G SM SFP series of multi-rate fiber optic transceivers with
integrated digital diagnostics monitoring functionality provide a quick
and reliable interface for OC-12 short reach (SR), intermediate reach (IR)
and long reach (LR) applications. The diagnostic functions, alarm and
warning features as described in the Multi-Source Agreement (MSA)
document, SFF-8472 (Rev.9.4), are provided via an I²C serial interface.
Available products under this series are compliant with SONET/SDH
standards for OC-12/STM-4 applications and are capable of operating
down to 155Mb/s data rate. The SR-1 and IR-1 versions are compliant
with OC-12/STM-4 and OC-3/STM-1 interface standards. All modules
satisfy Class 1 Laser Safety requirements in accordance with the U.S. and
international standards as described in the FDA/CDRH and IEC-60825
documents, respectively.
The TRPC12-E2G multi-rate transceivers connect to standard 20-pad
SFP connectors for hot plug capability. This allows the system designer
to make configuration changes or maintenance by simply plugging in
different types of transceivers without shutting down the power supply
from the host system.
The transceivers have colored bail-type latches, which offer an easy and
convenient way to release the modules. The latch is compliant with the
SFP MSA.
The transmitter design incorporates a highly reliable 1310nm or 1550nm
InGaAsP laser and an integrated driver circuit. The receiver features a
transimpedance amplifier IC optimized for high sensitivity and wide
dynamic range. The transmitter and receiver DATA interfaces are AC-
coupled internally. LVTTL Transmitter Disable control input and Loss of
Signal output interfaces are also provided.
The transceivers operate from a single +3.3V power supply over operating
case temperature ranges of -5°C to +70°C (COM), -40°C to +85°C (IND) or
-5°C to +85°C (EXT). The housing is made of metal for EMI immunity.
Features
 Compliant with SONET/SDH OC-12/STM-4(622Mb/s)
 Compliant with SONET/SDH OC-3/STM-1(155Mb/s)
 Compliant with SFP MSA
 SONET/SDH Reaches (SR-1,IR-1,LR-1 & LR-2)
 Digital Diagnostics through Serial Interface
 Internal Calibration for Digital Diagnostics
 Eye Safe (Class 1 Laser Safety)
 Duplex LC Optical Interface
 Wide Operating Case Temperature Option
 Excellent EMI & ESD Protection
 Hot-pluggable
 TX Fault & Loss of Signal Outputs
 TX Disable Input
 Single +3.3V Power Supply
 RoHs Compliant
Absolute Maximum Ratings
Parameter
Symbol
Storage Temperature Range
T_ST
Commercial
Operating Case Temperature ¹
Extended
T_OP
Industrial
Supply Voltage
V_CC
Input Voltage
V_IN
1 _{Measured on top side of SFP module at the front center vent hole of the cage.}
Minimum
- 40
-5
-5
- 40
0
0
Maximum
+ 85
+ 70
+ 85
+ 85
+ 5.0
+ 5.0
Units
°C
°C
V
V
S0442, Rev.01. (web) 2014-05-16