TRPE48KE2C00010 Datasheet, PDF (1/5 Pages) OPLINK Communications Inc. – Extended Reach Multi-rate OC-48/STM-16 LR-2/L-16.2 SFP CWDM Transceivers with Digital Diagnostics

Extended Reach Multi-rate OC-48/STM-16 LR-2/L-16.2
SFP CWDM Transceivers with Digital Diagnostics
TRPE48KE2 CWDM
Pro d u c t De s c rip tio n
The TRPE48KE2 CWDM SFP series of multi-rate ber optic transceivers
with digital diagnostics monitoring functionality provide a quick and
reliable interface for extended reach LR-2 applications. Diagnostics
monitoring functionality (alarm and warning features) is integrated
into the design via an I²C serial interface per the Multi-Source
Agreement (MSA) SFF-8472, Rev. 9.4.
Products under this series are compatible with SONET/SDH
standards for OC-48/STM-16 (2.488Gb/s) LR-2/ L-16.2 extended reach
applications, OC-3/STM-1 (156Mb/s) and OC-12/STM-4 (622Mb/s)
SR/I-1 and I-4 short reach applications; Gigabit Ethernet LX (1.25Gb/s)
applications per IEEE 802.3; and Fibre Channel 200-SM-LC-L (2.125Gb/s)
and 100-SM-LC-L (1.062Gb/s) applications per FC-PI standards. The
transceivers support data rates ranging from 2.67Gb/s down to
125Mb/s and are available in eight (8) wavelengths: 1471nm, 1491nm,
1511nm, 1531nm, 1551nm, 1571nm, 1591nm and 1611nm. The higher
optical link power budget of 32dB is to accommodate the wavelength
multiplexing and de-multiplexing insertion losses. All transceivers are
Class I Laser products per U.S. FDA/CDRH and international IEC-60825
standards.
The TRPE48KE2 CWDM transceivers connect to standard 20-pad SFP
connectors for hot plug capability. This allows the system designer
to make con guration changes or maintenance by simply plugging
in di erent types of transceivers without removing the power supply
from the host system.
The transceivers have colored bail-type latches, which o er an easy
and convenient way to release the modules. The latch is compliant
with the SFP MSA.
The transmitter and receiver DATA interfaces are AC-coupled internally.
LV-TTL Transmitter Disable control input and Loss of Signal (LOS)
output interfaces are also provided.
A bsolute Maximum R atings
Parameter
Symbol
Storage Temperature
T_ST
Operating Case Temperature¹
Commercial Temp.
Extended Temp.
T_OP
Supply Voltage
V_CC
Maximum Input Optical Power (30 seconds max.)
P_in,max
Input Voltage
V_IN
1_{Measured on top side of SFP module at the front center vent hole of the cage.}
F e a tu re s
þ Distance up to 100km with Single Mode Fiber
þ Eight (8) Wavelength CWDM Transceivers
þ Compatible with SFP MSA
þ Compatible with SONET/SDH OC-48/STM-16
(2.488Gb/s) LR-2/L-16.2 Applications
þ Compatible with Gigabit Ethernet LX
þ Compatible with Fibre Channel 200-SM-LC-L and
100-SM-LC-L
þ Digital Diagnostics through Serial Interface
þ Internal Calibration for Digital Diagnostics
þ APD Receiver
þ Optical Link Power Budget of 32dB Minimum
þ Eye Safe (Class I Laser Safety)
þ Hot-pluggable
þ TX Fault & Loss of Signal Outputs
þ TX Disable Input
Minimum
- 40
-5
-5
0
-
0
Maximum
+ 85
+ 70
+ 85
+ 4.5
+ 3.0
V_CC
Units
°C
°C
V
dBm
V
An Oplink Company
21737-0976, Rev.A
2009-02-20