TRPE03-G Datasheet, PDF (1/5 Pages) OPLINK Communications Inc. – SFP CWDM Transceivers with Digital Diagnostics

OC-3/STM-1 SFP CWDM Transceivers
with Digital Diagnostics
TRPE03-G CWDM
Pb
Product Description
The TRPE03-G CWDM SFP series of fiber optic transceivers with inte-
grated digital diagnostics monitoring functionality provide a quick
and reliable interface for long reach (LR) applications. The diagnos-
tic functions, alarm and warning features as described in the Multi-
Source Agreement (MSA) document, SFF-8472 (Rev.9.4), are provided
via an I²C serial interface.
Products under this series are compatible with SONET/SDH stan-
dards for OC-3/STM-1 LR-2/L-1.2 and are available in eight (8) wave-
lengths: 1471nm, 1491nm, 1511nm, 1531nm, 1551nm, 1571nm,
1591nm and 1611nm. Two optical link power budgets are available,
32dB and 34dB, providing an extra 3dB and 5dB over SONET/SDH link
budgets, respectively, to accommodate the wavelength multiplexing
and de-multiplexing insertion losses. All modules satisfy Class I Laser
Safety requirements in accordance with the U.S. FDA/CDRH and in-
ternational IEC-60825 standards.
The TRPE03-G CWDM transceivers connect to standard 20-pad con-
nectors for hot plug capability. This allows the system designer to
make configuration changes or maintenance by simply plugging in
different types of transceivers without removing the power supply
from the host system.
The transceivers have colored bail-type latches, which offer an easy
and convenient way to release the modules. The latch is compliant
with the SFP MSA.
The transmitter and receiver DATA interfaces are AC-coupled inter-
nally. LV-TTL Transmitter Disable control input and Loss of Signal out-
put interfaces are also provided.
The transceivers operate from a single +3.3V power supply over an
operating case temperature range of -5°C to +70°C (Commercial) or
-5°C to +85°C (Extended). The housing is made of metal for EMI im-
munity.
Features
 Eight (8) Wavelength CWDM Transceivers
 Lead Free Design & Fully RoHS Compliant
 Compatible with SFP MSA
 Compatible with SONET/SDH OC-3/STM-1
(155Mb/s) LR-2/L-1.2 Long Reach Specifications
 Digital Diagnostics through Serial Interface
 Internal Calibration for Digital Diagnostics
 Optical Link Power Budgets of 32dB & 34dB
Minimum
 Eye Safe (Class I Laser Safety)
 Duplex LC Optical Interface
 Loss of Signal Output & TX Disable Input
 Hot-pluggable
 TX Fault & Loss of Signal Outputs
 TX Disable Input
Absolute Maximum Ratings
Parameter
Symbol
Storage Temperature
T_ST
Commercial
Operating Case Temperature ¹
Extended
T_OP
Supply Voltage
V_CC
Input Voltage
V_IN
1 _{Measured on top side of SFP module at the front center vent hole of the cage.}
Minimum
- 40
-5
-5
0
0
Maximum
+ 85
+ 70
+ 85
+ 5.0
V_CC
Units
°C
°C
V
V
An Oplink Company
S0210. Rev02. (web) 2012.06.22