TRPE03-E1 Datasheet, PDF (1/5 Pages) OPLINK Communications Inc. – Transceivers with Digital Diagnostics

OC-3/STM-1 SFP
Transceivers with Digital Diagnostics
TRPE03-E1 Single Mode
Produ c t D es c rip tion
The TRPE03-E1 SFP series of fiber optic transceivers w ith integrated
digital diagnostics monitoring functionality provide a quick and reliable
interface for short reach (SR),intermediate reach (IR)and long reach (LR)
applications. The diagnostic functions, alarm and w arning features as
described in the Multi-Source Agreement (MSA ) document, SFF-8472
(Rev. 9.4),are provided via an I²C serial interface.
Available products under this series are compliant w ith applicable SONET/
SDH standards for OC-3/STM-1. A ll modules satisfy Class I Laser Safety
requirements in accordance w ith the U .S. FDA /CDRH and international
IEC-60825 standards.
The TRPE03-E1 transceivers connect to standard 20-pad SFP connectors
for hot plug capability. This allow s the system designer to make
configuration changes or maintenance by simply plugging in different
types of transceivers w ithout removing the pow er supply from the host
system.
The transceivers have colored bail-type latches,w hich offer an easy and
convenient w ay to release the modules. The latch is compliant w ith the
SFP MSA .
The transmitter design incorporates a highly reliable 1310nm or 1550nm
InG aA sP laser and a driver circuit. The receiver features a transimpedance
amplifier IC optimized for high sensitivity and w ide dynamic range. The
transmitter and receiver DATA interfaces are A C-coupled internally. LVTTL
Transmitter Disable control input and Loss of Signal output interfaces are
also provided.
The transceivers operate from a single +3.3V pow er supply over tw o
operating case temperature ranges of -5°C to +70°C (COM),or -40°C to
+85°C (IND). The housing is made of metal for EMI immunity.
A bsolute Maximum R atings
Parameter
Symbol
Storage Temperature
T_st
Operating Case Temperature¹
“COM”
“IND”
T_op
Supply Voltage
V_cc
Input Voltage
V_in
1_{Measured on top side of SFP module at the front center vent hole of the cage.}
F ea tu res
þ Compatible w ith SFP MSA
þ Compliant w ith SONET/SDH OC-3/STM-1
(155Mb/s)
þ SONET/SDH Reaches (SR-1,IR-1,LR-1 & LR-2)
þ Digital Diagnostics through Serial Interface
þ Internal Calibration for Digital Diagnostics
þ Eye Safe (Class I Laser Safety)
þ Duplex LC Optical Interface
þ -40°C to +85°C Operating Case Temperature
Option
þ Excellent EMI & ESD Protection
þ H ot-pluggable
þ TX Fault & Loss of Signal Outputs
þ TX Disable Input
þ Single +3.3V Pow er Supply
Minimum
- 40
-5
- 40
0
0
Maximum
+ 85
+ 70
+ 85
+ 5.0
V_cc
Units
°C
°C
V
V
An Oplink Company
21737-0969,Rev.A
2008-11-11