TRPCG1CLXC000E2G Datasheet, PDF (1/5 Pages) OPLINK Communications Inc. – Multi-rate Gigabit Ethernet & Fibre Channel SFP Transceivers with Digital DiaGnostics

Multi-rate Gigabit Ethernet & Fibre Channel
SFP Transceivers with Digital DiaGnostics
TRPCG1-E2G Single Mode
Product Description
The TRPCG1-E2G SFP series of multi-rate fiber optic transceivers with
integrated digital diagnostics monitoring functionality provide a quick
and reliable interface for 1000BASE-LX Gigabit Ethernet and 1.062GBd
Fibre Channel applications. The transceivers are designed to support
data rates ranging from 1.25Gb/s down to 125Mb/s. The diagnostic
functions, alarm and warning features as described in the Multi-Source
Agreement (MSA) document, SFF-8472 (Rev. 9.4), are provided via an
I²C serial interface.
The transceivers use a 1310nm Fabry Perot laser and provides a
minimum optical link budget of 11dB, corresponding to a minimum
distance of 10km, assuming fiber loss of 0.45dB/km. All modules
satisfy Class I Laser Safety requirements in accordance with the U.S.
FDA/CDRH and international IEC-60825 standards.
The transceivers connect to standard 20-pad SFP connectors for hot
plug capability. This allows the system designer to make configuration
changes or maintenance by simply plugging in different types of
transceivers without removing the power supply from the host
system.
The transceivers have colored bail-type latches, which offer an easy
and convenient way to release the modules. The latch is compliant
with the SFP MSA.
The transmitter and receiver DATA interfaces are AC-coupled internally.
LV-TTL Transmitter Disable control input and Loss of Signal output
interfaces are also provided.
The transceivers operate from a single +3.3V power supply over
operating case temperature ranges of -5°C to +70°C (Commercial)
or -40°C to +85°C (Industrial). The housing is made of metal for EMI
immunity.
Features
 Lead Free Designed & Fully RoHS compliant
 Compliant with IEEE 802.3z Gigabit Ethernet
1000BASE-LX PMD Specifications
 Compliant with SFP MSA
 Digital Diagnostics through Serial Interface
 Internal Calibration for Digital Diagnostics
 Distance Options to Support 10km
 Eye Safe (Class I Laser Safety)
 Duplex LC Optical Interface
 Loss of Signal Output & TX Disable Input
 -40°C to +85°C Operating Case Temperature Option
 Hot-pluggable
 Single +3.3V Power Supply
Absolute Maximum Ratings
Parameter
Symbol
Storage Temperature
T_st
Commercial
Operating Case Temperature ¹
Industrial
T_op
Supply Voltage
V_cc
Input Voltage
V_in
1 _{Measured on top side of SFP module at the front center vent hole of the cage.}
Minimum
- 40
-5
- 40
0
0
Maximum
+ 85
+ 70
+ 85
+ 3.47
V_cc
Units
°C
°C
V
V
An Oplink Company
21737-0973, Rev.A
2009-01-30