TRPC03-E1G Datasheet, PDF (1/5 Pages) OPLINK Communications Inc. – Transceivers with Digital Diagnostics

OC-3/STM-1 SFP
Transceivers with Digital Diagnostics
TRPC03-E1G Single Mode
Pb
Produ c t D es c rip tion
The TRPC03-E1G SFP series of fiber optic transceivers w ith
integrated digital diagnostics monitoring functionality provide
a quick and reliable interface for short reach (SR),intermediate
reach (IR) and long reach (LR) applications. The diagnostic
functions,alarm and w arning features as described in the Multi-
Source Agreement (MSA ) document,SFF-8472 (Rev. 9.4),are
provided via an I²C serial interface.
Available products under this series are compliant w ith
applicable SON ET/SD H standards for OC-3/STM-1. A ll modules
satisfy Class I Laser Safety requirements in accordance w ith the
U .S. FD A /CD RH and international IEC-60825 standards.
The TRPC03-E1G transceivers connect to standard 20-pad
SFP connectors for hot plug capability. This allow s the system
designer to make configuration changes or maintenance by
simply plugging in different types of transceivers w ithout
removing the pow er supply from the host system.
The transceivers have colored bail-type latches,w hich offer an
easy and convenient w ay to release the modules. The latch is
compliant w ith the SFP MSA .
The transmitter design incorporates a highly reliable 1310nm
InG aA sP laser and a driver circuit. The receiver features a
transimpedance amplifier IC optimized for high sensitivity
and w ide dynamic range. The transmitter and receiver D ATA
interfaces are AC-coupled internally. LVTTL Transmitter D isable
control input and Loss of Signal output interfaces are also
provided.
The transceivers operate from a single +3.3V pow er supply over
tw o operating case temperature ranges of -5°C to +70°C (COM),
or -40°C to +85°C (IN D ). The housing is made of metal for EMI
immunity.
F ea tu res
þ Compatible w ith SFP MSA
þ Compliant w ith SON ET/SD H OC-3/STM-1 (155Mb/s)
þ Lead Free D esign & Fully RoH S Compliant
þ SON ET/SD H Reaches (SR-1,IR-1 & LR-1)
þ D igital D iagnostics through Serial Interface
þ Internal Calibration for D igital D iagnostics
þ Eye Safe (Class I Laser Safety)
þ D uplex LC Optical Interface
þ -40°C to +85°C Operating Case Temperature Option
þ Excellent EMI & ESD Protection
þ H ot-pluggable
þ TX Fault & Loss of Signal Outputs
þ TX D isable Input
þ Single +3.3V Pow er Supply
A bsolute Maximum R atings
Parameter
Symbol
Storage Temperature
T_st
Operating Case Temperature¹
Commercial
Industrial
T_op
Supply Voltage
V_cc
Input Voltage
V_in
1_{Measured on top side of SFP module at the front center vent hole of the cage.}
Minimum
- 40
-5
- 40
0
0
Maximum
+ 85
+ 70
+ 85
+ 5.0
V_cc
Units
°C
°C
V
V
An Oplink Company
S0115,Rev.02
2010-12-23