TRPAG1YXHBAM1 Datasheet, PDF (1/5 Pages) OPLINK Communications Inc. – Multi-rate Gigabit Ethernet & FibreChannel SFP CWDM Transceivers with Digital Diagnostics

Multi-rate Gigabit Ethernet & FibreChannel
SFP CWDM Transceivers with Digital Diagnostics
TRPAG1M CWDM MR
The TRPAG1M CWDM SFP series of multi-rate fiber optic transceivers with
integrated digital diagnostics monitoring functionality provide a quick
and reliable interface for 1000BASE-LX Gigabit Ethernet and 1.062GBd
Fibre Channel applications. The transceivers are designed to support data
rates ranging from 1.25Gb/s down to 125Mb/s. Diagnostics monitoring
functionality (alarm and warning features) is integrated into the design
via an I2C serial interface per the Multi-Source Agreement (MSA) SFF-8472,
Rev. 9.3.
There are eight center wavelengths available: 1471nm, 1491nm, 1511nm,
1531nm, 1551nm, 1571nm, 1591nm and 1611nm. Two optical link power
budget options are offered, YX (22dB minimum) and ZX (24dB minimum).
They correspond to transmission distances of 62km and 70km, respectively
(assuming a total connector/splice/ CWDM mux and demux loss of 4.5dB,
allocated system penalty of 2dB and fiber loss of 0.25dB/km). All modules
satisfy Class I Laser Safety requirements in accordanc with the U.S. FDA/
CDRH and international IEC-60825 standards.
The TRPAG1M CWDM transceivers connect to standard 20-pad SFP
connectors for hot plug capability. This allows the system designer to make
configuration changes or maintenance by simply plugging in different
types of transceivers without removing the power supply from the host
system.
The transceivers have colored bail-type latches, which offer an easy and
convenient way to release the modules. The latch is compliant with the
SFP MSA.
The transmitter and receiver DATA interfaces are ACcoupled internally. LV-
TTL Transmitter Disable control input and Loss of Signal output interfaces
are also provided.
The transceivers operate from a single +3.3V power supply over operating
case temperature range of -5°C to +70°C (“B” option) or -5°C to +85°C (“E”
option). The housing is made of plastic and metal for EMI immunity.
Features
 Eight (8) Wavelength CWDM Transceivers
 Compatible with SFP MSA
 Compatible with IEEE 802.3z Gigabit Ethernet
1000BASE-LX PMD Specifications
 Compatible with 1.062GBd Fibre Channel
100-SM-LC-L FC-PI Standards
 Digital Diagnostics through Serial Interface
 Internal Calibration for Digital Diagnostics
 Minimum Optical Link Power Budgets of 22dB
and 24dB to Support 62km and 70km (Please
see note on Distance in Ordering Information)
 Eye Safe (Class I Laser Safety)
 Duplex LC Optical Interface
 Loss of Signal Output & TX Disable Input
 Hot-pluggable
Absolute Maximum Ratings
Parameter
Symbol
Storage Temperature
T_ST
“B” Option
Operating Case Temperature¹
“E” Option
T_OP
Supply Voltage
V_CC
Input Voltage
V_IN
1 _{Measured on top side of SFP module at the front center vent hole of the cage.}
Minimum
- 40
-5
-5
0
0
Maximum
+ 85
+ 70
+ 85
+ 4.5
V_CC
Units
°C
°C
V
V
An Oplink Company
RevB-P. 2009.04.01