TRPAG1YXHAAM1 Datasheet, PDF (1/5 Pages) OPLINK Communications Inc. – Multi-rate Gigabit Ethernet & Fibre Channel SFP CWDM Transceivers with Digital Diagnostics

Multi-rate Gigabit Ethernet & Fibre Channel
SFP CWDM Transceivers with Digital Diagnostics
TRPAG1YX/ZXxAxMx
Product Description
The TRPAG1YX/ZXxAxMx SFP series of multi-rate fiber optic transceiv-
ers with integrated digital diagnostics monitoring functionality provide
a quick and reliable interface for 1000BASE-LX Gigabit Ethernet and
1.062GBd Fibre Channel applications. The transceivers are designed to
support data rates ranging from 1.25Gb/s down to 125Mb/s. Diagnos-
tics monitoring functionality (alarm and warning features) is integrated
into the design via an I²C serial interface per the Multi-Source Agreement
(MSA) SFF-8472, Rev. 9.3.
There are eight center wavelengths available: 1471nm, 1491nm, 1511nm,
1531nm, 1551nm, 1571nm, 1591nm and 1611nm. Two optical link power
budget options are offered, YX (22dB minimum) and ZX (24dB minimum).
They correspond to transmission distances of 62km and 70km, respec-
tively (assuming a total connector/splice/CWDM mux and demux loss of
4.5dB, allocated system penalty of 2dB and fiber loss of 0.25dB/km). All
modules satisfy Class I Laser Safety requirements in accordance with the
U.S. FDA/CDRH and international IEC-60825 standards.
The TRPAG1YX/ZXxAxMx CWDM transceivers connect to standard 20-pad
SFP connectors for hot plug capability. This allows the system designer to
make configuration changes or maintenance by simply plugging in dif-
ferent types of transceivers without removing the power supply from the
host system.
The transceivers have colored bail-type latches, which offer an easy and
convenient way to release the modules. The latch is compliant with the
SFP MSA.
The transmitter and receiver DATA interfaces are ACcoupled internally. LV-
TTL Transmitter Disable control input and Loss of Signal output interfaces
are also provided.
The transceivers operate from a single +3.3V power supply over an oper-
ating temperature range of -40°C to +85°C (-40°C to 0°C is ambient, and
0°C to +85°C is case). The housing is made of metal for EMI immunity.
Features
 Industrial Operating Temperature Range
 Eight (8) Wavelength CWDM Transceivers
 Compatible with SFP MSA
 Compatible with IEEE 802.3z Gigabit Ethernet
1000BASE-LX PMD Specifications
 Compatible with 1.062GBd Fibre Channel
100-SM-LC-L FC-PI Standards
 Digital Diagnostics through Serial Interface
 Internal Calibration for Digital Diagnostics
 Minimum Optical Link Power Budgets of 22dB
and 24dB to Support 62km and 70km
 Eye Safe (Class I Laser Safety)
 Duplex LC Optical Interface
 Loss of Signal Output & TX Disable Input
 Hot-pluggable
 Single +3.3V Power Supply
Absolute Maximum Ratings
Parameter
Symbol
Minimum
Maximum
Units
Storage Temperature
T_st
- 40
+ 85
°C
Operating Case Temperature ¹
Supply Voltage
T_op
- 40
+ 85
°C
V_cc
0
+ 4.5
V
Input Voltage
V_in
0
V_cc
V
1 _{-40°C to 0°C is ambient, and 0°C to +85°C is case temperature. For case temperature, measure on top side of SFP module at the front center vent hole}
of the cage.
An Oplink Company
RevB-P. 2009.04.01