TRPAG1SXLAES Datasheet, PDF (1/5 Pages) OPLINK Communications Inc. – Gigabit Ethernet SFP Multimode Transceiver with Digital Diagnostics

Gigabit Ethernet SFP Multimode
Transceiver with Digital Diagnostics
TRPAG1SXL AES
Product Description
The TRPAG1SXLAES SFP ber optic transceiver with integrated digital
diagnostics monitoring functionality provides a quick and reliable in-
terface for Gigabit Ethernet1000BASE-SX multimode applications. The
diagnostic functions, alarm and warning features as described in the
Multi-Source Agreement (MSA) document, SFF-8472(Rev. 9.4), are pro-
vided via an I²C serial interface.
A highly reliable 850nm wavelength Vertical Cavity Surface Emitting
Laser (VCSEL) is used in the transmitter. The transceiver satises Class I
Laser Safety requirements in accordance with the U.S. FDA/CDRH and
international IEC-60825 standards.
The TRPAG1SXLAES transceiver connects to a standard 20-pad SFP con-
nector for hot plug capability. This allows the system designer to make
conguration changes or maintenance by simply plugging in dierent
types of transceivers without removing the power supply from the host
system.
The transceiver has bail-type latch, which oers an easy and convenient
way to release the module. The latch is compliant with the SFP MSA.
The transmitter and receiver DATA interfaces are AC coupled internally.
LV-TTL Transmitter Disable controlinput and Loss of Signal output inter-
faces are also provided.
The transceiver operates from a single +3.3V power supply over an op-
erating case temperature range of -40°C to+85°C. The housing is made
of plastic and metal for EMI immunity.
Features
 Compatible with SFP MSA
 Compliant with IEEE 802.3z Gigabit Ethernet
1000BASE-SX PMD Specifications
 Digital Diagnostics through Serial Interface
 Internal Calibration for Digital Diagnostics
 Industrial Operating Temperature Range
 275m Distance with 62.5μm Multimode Fiber
 550m Distance with 50μm Multimode Fiber
 TX Disable Input
 Hot-pluggable Eye Safe (Class I Laser Safety)
 Duplex LC Optical Interface
 Single +3.3V Power Supply
Absolute Maximum Ratings
Parameter
Symbol
Storage Temperature
V_ST
Operating Case Temperature¹
Industrial²
V_OP
Supply Voltage
V_CC
Input Voltage
V_IN
1 _{Measured on top side of SFP module at the front center vent hole of the cage.}
Minimum
- 40
- 40
0
0
Maximum
+ 85
+ 85
+ 5.0
V_CC
Units
°C
°C
V
V
An Oplink Company
RevB-NP.2008.00909