|
TRPA12MCWDM Datasheet, PDF (1/5 Pages) OPLINK Communications Inc. – Multi-rate OC-12/STM-4 SFP CWDM Single Mode Transceivers withDigital Diagnostics | |||
|
Multi-rate OC-12/STM-4 SFP CWDM Single Mode
Transceivers withDigital Diagnostics
TRPA12M CWDM
Product Description
TheTRPA12M CWDM SFP series of multi-rate transceivers with integrated digital
diagnostics monitoring functionality provide a quick and reliable interface
for long reach (LR) applications. The diagnostic functions, alarm and warning
features as described in the Multi-Source Agreement (MSA) document, SFF-
8472 (Rev. 9.3), are provided via an I2C serial interface.
Products under this series are compatible with SONET/SDH standards for OC-
12/STM-4 LR-2/L-4.2 and are capable of operating down to 155Mb/s data rate.
There are eight (8) wavelengths available: 1471nm, 1491nm, 1511nm, 1531nm,
1551nm, 1571nm, 1591nm and 1611nm. Two optical link power budgets are
available, 27dB and 29dB, providing an extra 2dB and 4dB over SONET/SDH
link budgets, respectively, to accommodate the wavelength multiplexing
and de-multiplexing insertion losses. All modules satisfy Class I Laser Safety
requirements in accordance with the U.S. and international standards as
described in the FDA/CDRH and IEC-60825 documents, respectively.
The TRPA12M CWDM multi-rate transceivers connect to standard 20-pad SFP
connectors for hot plug capability. This allows the system designer to make
configuration changes or maintenance by simply plugging in different types
of transceivers without removing the power supply from the host system.
The transceivers have colored bail-type latches, which offer an easy and
convenient way to release the modules. The latch is compliant with the SFP
MSA.
The transmitter and receiver DATA interfaces are AC-coupled internally. LV-TTL
Transmitter Disable control input and loss of Signal output interfaces are also
provided.
The transceivers operate from a single +3.3V power supply over an operating
case temperature range of -5°C to +70°C (âBâ option) or -5°C to +85°C (âEâ
option). The housing is made of plastic and metal for EMI immunity.
Absolute Maximum Ratings
Parameter
Symbol
Storage Temperature
TST
âBâ Option
Operating Case Temperature1
âEâ Option
TOP
Supply Voltage
VCC
Input Voltage
VIN
1 Measured on top side of SFP module at the front center vent hole of the cage.
Features
ï¾ Eight (8) Wavelength CWDM Transceivers
ï¾ Compatible with SFP MSA
ï¾ Compatible with SONET/SDH OC-12/
STM-4 (622Mb/s) LR-2/L-4.2 Long Reach
Specifications
ï¾ Compatible with SONET/SDH OC-3/STM-1
(155Mb/s)
ï¾ Digital Diagnostics through Serial Interface
ï¾ Internal Calibration for Digital Diagnostics
ï¾ Optical Link Power Budgets of 27dB & 29dB
Minimum
ï¾ Eye Safe (Class I Laser Safety)
ï¾ Duplex LC Optical Interface
ï¾ Excellent EMI & ESD Protection
ï¾ Hot-pluggable
ï¾ TX Fault & Loss of Signal Outputs
ï¾ TX Disable Input
Minimum
- 40
-5
-5
0
0
Maximum
+ 85
+ 70
+ 85
+ 5.0
VCC
Units
°C
°C
V
V
An Oplink Company
RevB-NP. 2008.09.09
|
▷ |