TRPA03MM Datasheet, PDF (1/5 Pages) OPLINK Communications Inc. – OC-3/STM-1 SFP Multimode Transceivers with Digital Diagnostics

OC-3/STM-1 SFP Multimode
Transceivers with Digital Diagnostics
TRPA03MM
Product Description
The TRPA03MM SFP fiber optic transceivers with integrated digital diag-
nostics monitoring functionality provide a quick and reliable interface for
OC-3/STM-1 multimode applications. The diagnostic monitoring func-
tions, alarm and warning features are provided via an I²C serial interface.
The transceivers are designed to be compatible with the ATM require-
ments at OC-3/STM-1 (156Mb/s) data rate.
The TRPA03MM transceivers connect to standard 20-pad SFP connectors
for hot plug capability. This allows the system designer to make configu-
ration changes or maintenance by simply plugging in different types of
transceivers without removing the power supply from the host system.
The transmitter design incorporates a highly reliable 1310nm LED and an
integrated driver circuit. The receiver features a transimpedance amplifier
IC for high sensitivity and wide dynamic range. The transmitter and re-
ceiver DATA interfaces are AC-coupled internally. LV-TTL Transmitter Dis-
able control input and Loss of Signal output interfaces are also provided.
The transceivers operate from a single +3.3V power supply over three
operating case temperature ranges of -5°C to +70°C (“B” option), -5°C to
+85°C (“E” option) or -40°C to +85°C (“A” option). The housing is made of
plastic and metal for EMI enhancement.
Features
 Compatible with SFP MSA
 Compatible with ANSI-T1.646, ATM and
Specifications for OC-3/STM-1 (156Mb/s)
 Digital Diagnostics Monitoring through
Serial Interface
 Distances up to 2km
 Hot-pluggable
 Loss of Signal Output
 TX Disable Input
 Duplex LC Optical Interface
 Single +3.3V Power Supply
Absolute Maximum Ratings
Parameter
Symbol
Storage Temperature
T_st
“B” option
Operating Case Temperature ¹
“E” option
T_op
“A” option
Supply Voltage
V_cc
Input Voltage
V_in
1 _{Measured on top side of SFP module at the front center vent hole of the cage.}
Minimum
- 40
-5
-5
- 40
0
0
Maximum
+ 85
+ 70
+ 85
+ 85
+ 5.0
V_cc
Units
°C
°C
V
V
An Oplink Company
RevC-P.2009.04.02