TRP1G1XXXIXG Datasheet, PDF (1/6 Pages) OPLINK Communications Inc. – SFP CWDM Transceivers with Digital Diagnostics

Multi-rate Gigabit Ethernet & Fibre Channel SFP
CWDM Transceivers with Digital Diagnostics
TRP1G1xxXIxG CWDM
Pb
Product Description
The TRP1G1xxXIxG SFP series of multi-rate fiber optic transceiv-
ers with integrated digital diagnostics monitoring functional-
ity provide a quick and reliable interface for Gigabit Ethernet
and 1.062GBd Fibre Channel applications. The transceivers are
designed to support data rates ranging from 1.25Gb/s down to
125Mb/s. Diagnostics monitoring functionality (alarm and warn-
ing features) is integrated into the design via an I²C serial inter-
face per the Multi-Source Agreement (MSA) SFF-8472, Rev. 9.4.
There are eight center wavelengths available: 1471nm, 1491nm,
1511nm, 1531nm, 1551nm, 1571nm, 1591nm and 1611nm. Three
optical link power budget options are offered, YX (22dB mini-
mum), ZX (24dB minimum) and VX (32dB minimum). They cor-
respond to transmission distances of 62km, 70km and 120km,
respectively (assuming a total connector/splice/CWDM mux and
demux loss of 4.5dB, allocated system penalty of 2dB and fiber
loss of 0.25dB/km). All modules satisfy Class I Laser Safety require-
ments in accordance with the U.S. FDA/CDRH and international
IEC-60825 standards.
The TRP1G1xxXIxG CWDM transceivers connect to standard 20-
pad SFP connectors for hot plug capability. This allows the system
designer to make configuration changes or maintenance by sim-
ply plugging in different types of transceivers without removing
the power supply from the host system.
The transceivers have colored bail-type latches, which offer an
easy and convenient way to release the modules. The latch is
compliant with the SFP MSA.
The transmitter and receiver DATA interfaces are AC coupled in-
ternally. LV-TTL Transmitter Disable control input and Loss of Sig-
nal output interfaces are also provided.
The transceivers operate from a single +3.3V power supply over
an operating temperature range of -40°C to +85°C (-40°C to 0°C is
ambient, and 0°C to +85°C is case). The housing is made of metal
for EMI immunity.
Absolute Maximum Ratings
Features
 Industrial Operating Temperature Range
 Lead Free Design & Fully RoHS Compliant
 Eight (8) Wavelength CWDM Transceivers
 Compatible with SFP MSA
 Compatible with IEEE 802.3z Gigabit Ethernet
1000BASE-LX PMD Specifications
 Compatible with 1.062GBd Fibre Channel 100-SM-LC-L
FC-PI Standards
 Digital Diagnostics through Serial Interface
 Internal Calibration for Digital Diagnostics
 Minimum Optical Link Power Budgets of 22dB, 24dB
and 32dB to Support 62km, 70km and 120km
 Eye Safe (Class I Laser Safety)
 Duplex LC Optical Interface
 Loss of Signal Output & TX Disable Input
 Hot-pluggable
 Single +3.3V Power Supply
Parameter
Symbol
Minimum
Maximum
Units
Storage Temperature
T_st
- 40
+ 85
°C
Operating Case Temperature¹
T_op
- 40
+ 85
°C
Supply Voltage
Input Voltage
V_cc
0
+ 4.5
V
V_in
0
V_cc
V
1_{-40°C to 0°C is ambient, and 0°C to +85°C is case temperature. For case temperature, measure on top side of SFP module at the front center vent hole}
of the cage.
S0137. Rev. 04 (web) 2013-02-15