TRC1G1JC1C000F6G Datasheet, PDF (1/5 Pages) OPLINK Communications Inc. – Multi-rate Gigabit Ethernet & Fibre Channel SFP CWDM Transceivers with Digital Diagnostics

Multi-rate Gigabit Ethernet & Fibre Channel
SFP CWDM Transceivers with Digital Diagnostics
TRXAG1ZXM CWDM
Product Description
The TRXAG1ZXM CWDM SFP series of multi-rate fiber optic transceivers with
integrated digital diagnostics monitoring functionality provide a quick and
reliable interface for 1000BASE-LX Gigabit Ethernet and 1.062GBd Fibre Chan-
nel applications. The transceivers are designed to support data rates ranging
from 1.25Gb/s down to 125Mb/s. Diagnostics monitoring functionality (alarm
and warning features) is integrated into the design via an I²C serial interface
per the Multi-Source Agreement (MSA) SFF-8472, Rev. 9.4.
There are eight center wavelengths available: 1471nm, 1491nm, 1511nm,
1531nm, 1551nm, 1571nm, 1591nm and 1611nm. The transceivers use a high
power DFB laser to provide a minimum optical link power budget of 24dB,
which corresponds to a transmission distance of 70km (assuming a total con-
nector/splice/CWDM mux and demux loss of 4.5dB, allocated system penalty
of 2dB and fiber loss of 0.25dB/km). All modules satisfy Class I Laser Safety
requirements in accordance with the U.S. FDA/CDRH and international IEC-
60825 standards.
The TRXAG1ZXM CWDM transceivers connect to standard 20-pad SFP con-
nectors for hot plug capability. This allows the system designer to make con-
figuration changes or maintenance by simply plugging in different types of
transceivers without removing the power supply from the host system.
The transceivers have colored bail-type latches, which offer an easy and
convenient way to release the modules. The latch is compliant with the SFP
MSA.
The transmitter and receiver DATA interfaces are ACcoupled internally. LV-TTL
Transmitter Disable control input and Loss of Signal output interfaces are also
provided.
The transceivers operate from a single +3.3V power supply over an operating
case temperature range of -5°C to +70°C (“B” option) or -5°C to +85°C (“E” op-
tion). The housing is made of metal for EMI immunity.
Absolute Maximum Ratings
Parameter
Symbol
Storage Temperature
T_st
“B” option
Operating Case Temperature ¹
“E” option
T_op
Supply Voltage
V_cc
Input Voltage
V_in
Lead Terminal Finish, Reflow Profile Limits and MSL
-
1 _{Measured on top side of SFP module at the front center vent hole of the cage.}
Features
 Lead Free Design & Fully RoHS Compliant
 Eight (8) Wavelength CWDM Transceivers
 Compatible with SFP MSA
 Compatible with IEEE 802.3z Gigabit Ethernet
1000BASE-LX PMD Specifications
 Compatible with 1.062GBd Fibre Channel
100-SM-LC-L FC-PI Standards
 Digital Diagnostics through Serial Interface
 Internal Calibration for Digital Diagnostics
 24dB Optical Link Power Budget to Support 70km
 Eye Safe (Class I Laser Safety)
 Duplex LC Optical Interface
 Loss of Signal Output & TX Disable Input
 Hot-pluggable
 Single +3.3V Power Supply
Minimum
- 40
-5
-5
0
0
-
Maximum
+ 85
+ 70
+ 85
+ 4.5
V_cc
NA
Units
°C
°C
V
V
-
An Oplink Company
RevB-PN.2009.06.25