TPP1XGKZRXG-S0226 Datasheet, PDF (1/6 Pages) OPLINK Communications Inc. – 1550nm 80km SFP+ Transceiver

1550nm 80km SFP+ Transceiver
TPP1XGKZRxG
Pb
Product Description
The TPP1XGKZRxG is an enhanced small form factor pluggable (SFP+) fiber
optic transceiver with digital diagnostics monitoring functionality (DDM).
Supporting Ethernet and Fiber Channel data rates makes it ideally suited for
10Gbps data-com and storage area network applications. DDM functionality
(alarm and warning features) is integrated into the design via an I²C serial
interface per the Multi-Source Agreement (MSA) SFF-8472, Rev. 10.4.
The transceiver supports data rates ranging from 11.3Gbps down to 8Gbps.
It provides an excellent solution for data transmission at 1550nm over up
to 80km single mode fiber. The low power consumption and excellent EMI
performance enable system design with high port density. The product is
RoHS compliant and is designed and tested in accordance with industry
safety standards. The transceiver is Class I Laser product per U.S. FDA/CDRH
and international IEC-60825 standards.
The TPP1XGKZRxG transceiver connects to standard 20-pad SFP+ connectors
for hot plug capability. This allows the system designer to make configuration
changes or maintenance by simply plugging in different transceivers without
removing the power supply from the host system. The transmitter and receiver
DATA interfaces are internally AC-coupled. LV-TTL Transmitter Disable control
input and Loss of Signal (LOS) output interfaces are also provided.
The transceiver has bail-type latch, which offers an easy and convenient way
to release the modules. The latch is compliant with the SFP MSA.
The transceiver operates from a single +3.3V power supply over an operating
case temperature range of -5°C to +70°C (Commercial), or -5°C to +85°C
(Extended) or -40°C to +85°C (Industrial). The housing is made of metal for
EMI immunity.
Features
 Transmission distance up to 80km (SM Fiber)
 Low power consumption
 Wide case operating temperature range
 Compliant to SFP+ Electrical MSA SFF-8431
 Compliant to SFP+ Mechanical MSA SFF-8432
 Digital Diagnostics Monitoring (DDM) through
Serial Interface comply with SFF-8472, Rev. 10.4
 RoHS 6/6 compliant
 Laser Class 1 IEC/CDRH compliant
Absolute Maximum Ratings
Parameter
Symbol
Storage Temperature Range
T_ST
“Commercial”
Operating Case Temperature ¹
“Extended”
T_OP
“Industrial”
Operating Relative Humidity ²
RH
Supply Voltage Range
V_CC
1 _{Measured on top side of SFP+ module at the front center vent hole of the cage.}
2 _{Non condensing}
Minimum
- 40
-5
-5
- 40
0
- 0.5
Maximum
+ 85
+ 70
+ 85
+ 85
85
+ 3.6
Units
°C
°C
%
V
An Oplink Company
S0226. Rev.02. 2012-12-15