TPD1XGJERXX Datasheet, PDF (1/9 Pages) OPLINK Communications Inc. – DWDM 40km SFP+ Transceivers

DWDM 40km SFP+ Transceivers
TPD1XGJERxx
Pb
Product Description
The TPD1XGJERxx is an enhanced small form factor pluggable (SFP+) fiber
optic transceiver with digital diagnostics monitoring functionality (DDM).
Supporting Ethernet and Fiber Channel standards with dense wavelength
division multiplexing (DWDM) wavelength makes it ideally suited for high
capacity data-com and storage area network applications. DDM functionality
(alarm and warning features) is integrated into the design via an I²C serial
interface per the Multi-Source Agreement (MSA) SFF-8472, Rev. 10.4.
Each transceiver utilizes an electro absorption modulator integrated laser
(EML) with an operating wavelength with 100GHz (0.8nm) spacing per the
ITU-grid. The transceiver supports data rates ranging from 11.3Gbps down
to 8Gbps. It provides an excellent solution for data transmission at DWDM
wavelength over up to 40km single mode fiber. The low power consumption
and excellent EMI performance enable system design with high port density.
The product is RoHS compliant and is designed and tested in accordance
with industry safety standards. The transceiver is Class I Laser product per U.S.
FDA/CDRH and international IEC-60825 standards.
The TPD1XGJERxx transceiver connects to standard 20-pad SFP+ connectors
for hot plug capability. This allows the system designer to make configuration
changes or maintenance by simply plugging in different transceivers without
removing the power supply from the host system. The transmitter and
receiver DATA interfaces are internally AC-coupled. LV-TTL Transmitter Disable
control input and Loss of Signal (LOS) output interfaces are also provided. The
transceiver has bail-type latch, which offers an easy and convenient way to
release the modules.
The transceiver operates from a single +3.3V power supply over an operating
case temperature range of -5°C to +70°C (Commercial), or -5°C to +85°C
(Extended) or -40°C to +85°C (Industrial).
Features
 Temperature-stablized DWDM EML transmitter
 Multi-rate for Ethernet & Fiber Channel
 Transmission distance up to 40km (SM Fiber)
 Low power consumption
 Wide case operating temperature range
 Compliant to SFP+ Electrical MSA SFF-8431
 Compliant to SFP+ Mechanical MSA SFF-8432
 Compliant to 10GBASE-E specifications
 Digital Diagnostics Monitoring (DDM) through
Serial Interface comply with SFF-8472, Rev. 10.4
 RoHS 6/6 Compliant
 Laser Class 1 IEC/CDRH compliant
Absolute Maximum Ratings
Parameter
Symbol
Storage Temperature Range
T_ST
“Commercial”
Operating Case Temperature ¹
“Extended”
T_OP
“Industrial”
Operating Relative Humidity ²
RH
Supply Voltage Range
V_CC
1 _{Measured on top side of SFP+ module at the front center vent hole of the cage.}
2 _{Non condensing}
Minimum
- 40
-5
-5
- 40
0
- 0.5
Maximum
+ 85
+ 70
+ 85
+ 85
85
+ 3.6
Units
°C
°C
%
V
S0217. Rev.02 (web) 2014-02-24