SRX48-0415 Datasheet, PDF (1/4 Pages) OPLINK Communications Inc. – OC-48/STM-16 Receiver without Clock Recovery

OC-48/STM-16 Receiver without Clock
Recovery
SRX48 Seris
Product Description
The SRX48 modules are receivers designed to meet or exceed the SO-
NET/SDH optical interface requirements at OC-48/STM-16 (2.488 Gb/s)
data rate. Three performance versions are available which are fully com-
pliant with Short Reach, Intermediate Reach and Long Reach specifica-
tions at 1300 nm or 1550 nm wavelength.
The receiver for the Short Reach and Intermediate Reach version uses
PIN photodiodes. For the Long Reach version, InGaAs avalanche pho-
todiodes (APDs) are used to achieve high sensitivity. The Long Reach
receiver features a low noise GaAs transimpedance IC with AGC capa-
bility to provide an extremely wide dynamic range. The DATA outputs
are differential signals designed to be AC-coupled into 50 ohm load. A
TTL Signal Detect function which indicates loss of optical input and an
analog Received Optical Power Monitor output are also provided.
All receiver modules can be operated with a single +5V supply. The op-
erating temperature range is -40°C to +85°C for the Short Reach and In-
termediate Reach version and 0°C to +70°C for the Long Reach version.
All receivers are housed in a 24-pin dual-in-line metal package with a
fiber pigtail (single mode fiber for Long Reach version and 50/125 μm
multimode fiber for Short Reach and Intermediate Reach versions),
which is terminated with MU, LC, ST, FC or SC connector.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature
“I” option (“SR” & “IR” only)
“H” option
Maximum Optical Input Power (“LR” only)
Supply Voltage
Input Voltage
Lead Soldering Temperature & Time
Symbol
T_ST
T_OP
P_{in, max}
V_CC
V_IN
-
Features
 Fully compliant with SONET/SDH OC-48 (2.5
Gb/s) specifications
 Long Reach 1310 nm & 1550 nm as well as
Intermediate Reach and Short Reach
 Internal temperature-compensated High
Voltage APD Supply (Long Reach version)
 -40°C to +85°C Operating Temperature
(Intermediate Reach and Short Reach)
 24-pin DIP metal package
 MU, LC, FC, ST, SC-connectorized fiber pigtails
 Differential DATA interface
 Received Optical Power Monitor function
 TTL SIGNAL DETECT output
 Single +5 V supply
Minimum
- 40
- 40
0
-
0
0
-
Maximum
Units
+ 85
°C
+ 85
°C
+ 70
- 5.0
dBm
+ 6.0
V
V_CC
V
260°C, 10 sec
An Oplink Company
R5.2008.04.30