S0297-TPP4XGFLRXG Datasheet, PDF (1/6 Pages) OPLINK Communications Inc. – 1310nm 10km SFP+ Transceiver

1310nm 10km SFP+ Transceiver
TPP4XGFLRxG
Pb
Product Description
The TPP4XGFLRxG is an enhanced small form factor pluggable (SFP+) fiber
optic transceiver with digital diagnostics monitoring functionality (DDM).
Compliance with Ethernet standard makes it ideally suited for 10Gbps
data-com applications. DDM functionality (alarm and warning features) is
integrated into the design via an I²C serial interface per the Multi-Source
Agreement (MSA) SFF-8472, Rev. 10.4.
The transceiver supports data rates from 11.3Gbps down to 8Gbps. It provides
an excellent solution for data transmission at 1310nm over up to 10km single
mode fiber. The sub-watt power consumption and excellent EMI performance
allow system design with high port density. The product is RoHS compliant
and is designed and tested in accordance with industry safety standards. The
transceiver is Class I Laser product per U.S. FDA/CDRH and international IEC-
60825 standards.
The TPP4XGFLRxG transceiver connects to standard 20-pad SFP+ connectors
for hot plug capability. This allows the system designer to make configuration
changes or maintenance by simply plugging in different transceivers without
removing the power supply from the host system. The transmitter and receiver
DATA interfaces are internally AC-coupled. LV-TTL Transmitter Disable control
input and Loss of Signal (LOS) output interfaces are also provided.
The transceiver has bail-type latch, which offers an easy and convenient way
to release the modules. The latch is compliant with the SFP MSA.
The transceiver operates from a single +3.3V power supply over an operating
case temperature range of -5°C to +70°C (Commercial), or -5°C to +85°C
(Extended) or -40°C to +85°C (Industrial). The housing is made of metal for
EMI immunity.
Features
 Transmission distance up to 10km (SM fiber)
 Low power consumption
 Wide case operating temperature range
 Compliant to SFP+ Electrical MSA SFF-8431
 Compliant to SFP+ Mechanical MSA SFF-8432
 Compliant to 10GBASE-L specifications
 Digital Diagnostics Monitoring (DDM) through
Serial Interface compliant with SFF-8472, Rev.
10.4
 RoHS 6/6 Compliant
 Laser Class 1 IEC/CDRH Compliant
Absolute Maximum Ratings
Parameter
Symbol
Minimum
Maximum
Storage Temperature Range
T_ST
- 40
+ 85
Preliminary ^{“Commercial”}
-5
+ 70
Operating Case Temperature ¹
“Extended”
T_OP
-5
+ 85
“Industrial”
- 40
+ 85
Operating Relative Humidity ²
RH
0
85
Supply Voltage Range
V_CC
- 0.5
1 _{Measured on top side of SFP+ module at the front center vent hole of the cage}
2 _{Non condensing}
+ 3.6
Units
°C
°C
%
V
An Oplink Company
S0297. Rev.01. (web) 2012-04-05