S0268-TXP1XGDS1X Datasheet, PDF (1/6 Pages) OPLINK Communications Inc. – Multi-rate 10-Gigabit SR-1XFP Transceiver with Digital Diagnostics

Multi-rate 10-Gigabit SR-1XFP Transceiver
with Digital Diagnostics
TXP1XGDS1x
Pb
Product Description
The TXP1XGDS1x XFP multi-rate fiber optic transceivers with digital
diagnostics monitoring functionality provide a quick and reliable interface
for 10G short reach applications. The diagnostic functions, alarm and
warning features as described in the XFP Multi-Source Agreement (MSA)
are provided via standard I²C serial interface. The transceivers are compliant
with the XFP Multi-Source Agreement and are designed to support SONET/
SDH, 10G Ethernet, and 10G Fiber Channel data rates from 9.95Gb/s to
11.09Gb/s.
Each transceiver utilizes a 1310nm Distributed Feed Back (DFB) laser for
up to 10km data transmission over single mode fiber. They satisfy Class
I Laser Safety requirements in accordance with the U.S. FDA/CDRH and
international IEC-60825 standards. The receiver features an InGaAs/InP
PIN photodiode and a transimpedance amplifier IC optimized for high
sensitivity and wide dynamic range. The transmitter and receiver DATA
interfaces are AC-coupled Current Mode Logic (CML). LV-TTL Transmitter
Disable control input and Loss of Signal output interfaces are also provided.
The transceivers connect to standard 30-pad XFP connectors for hot plug
capability. This allows the system designer to make configuration changes
or maintenance by simply plugging in different types of transceivers
without removing the power supply from the host system.
The transceivers operate from a single +3.3V power supply over a operating
temperature range of -5°C to +70°C (Commercial), -5°C to +85°C (Extended),
or -40°C to +85°C (Industrial).
Features
 Lead Free Design & Fully RoHS Compliant
 Compliant with XFP MSA
 Compliant with OC-192/STM-64
 Compliant with IEEE802.3ae
 Compliant with ITU-T G.709
 Support 10G Fiber Channel Applications
 Digital Diagnostics Monitoring
 1310nm DFB Laser
 Wide Case Operating Temperature Range
 Laser Classe 1 IEC/CDRH compliant
 Transmission Distance up to 10km
Absolute Maximum Ratings
Parameter
Storage Temperature Range
Commercial
Operating Case Temperature ¹
Extended
Industrial
Supply Voltage
Input Voltage
1 _{Case temperature is measured on top side of XFP module.}
Symbol
T_ST
T_OP
V_CC3
V_IN
Minimum
- 40
-5
-5
- 40
- 0.2
0
Maximum
+ 85
+ 70
+ 85
+ 85
+ 3.6
V _CC
Units
°C
°C
V
V
An Oplink Company
S0268. Rev.02. 2012-02-10