S0260-TPC1XGKZRXG Datasheet, PDF (1/6 Pages) OPLINK Communications Inc. – CWDM 70km SFP+ Transceivers

CWDM 70km SFP+ Transceivers
TPC1XGKZRxG
Pb
Product Description
The TPC1XGKZRxG is an enhanced small form factor pluggable (SFP+) fiber
optic transceiver with digital diagnostics monitoring functionality (DDM).
Supporting Ethernet and Fiber Channel standards makes it ideally suited
for high capacity data-com and storage area network applications. DDM
functionality (alarm and warning features) is integrated into the design via an
I²C serial interface per the Multi-Source Agreement (MSA) SFF-8472, Rev. 10.4.
Each transceiver utilizes an electro absorption modulator integrated laser
(EML) with an operating wavelength with selectable to ITU-T standards
covering CWDM grid wavelengths. The transceiver supports data rates
ranging from 11.3Gbps down to 8Gbps. It provides an excellent solution
for data transmission at CWDM wavelength over up to 70km single mode
fiber. The low power consumption and excellent EMI performance enable
system design with high port density. The product is RoHS compliant and
is designed and tested in accordance with industry safety standards. The
transceiver is Class I Laser product per U.S. FDA/CDRH and international IEC-
60825 standards.
The TPC1XGKZRxG transceiver connects to standard 20-pad SFP+ connectors
for hot plug capability. This allows the system designer to make configuration
changes or maintenance by simply plugging in different transceivers without
removing the power supply from the host system. The transmitter and
receiver DATA interfaces are internally AC-coupled. LV-TTL Transmitter Disable
control input and Loss of Signal (LOS) output interfaces are also provided. The
transceiver has bail-type latch, which offers an easy and convenient way to
release the modules.
The transceiver operates from a single +3.3V power supply over an operating
case temperature range of -5°C to +70°C (commercial). The housing is made
of metal for EMI immunity.
Features
 Temperature-stablized CWDM EML transmitter
 Transmission distance up to 70km (SM Fiber)
 Low power consumption
 Wide case operating temperature range
 Compliant with SFP+ Electrical MSA SFF-8431
 Compliant with SFP+ Mechanical MSA SFF-8432
 Compliant with 10GBASE-E specifications
 Digital Diagnostics Monitoring (DDM) through
Serial Interface comply with SFF-8472, Rev. 10.4
 RoHS 6/6 Compliant
 Laser Class 1 IEC/CDRH compliant
Absolute Maximum Ratings
Parameter
Symbol
Storage Temperature Range
T_ST
Operating Case Temperature ¹
“Commercial”
T_OP
Operating Relative Humidity ²
RH
Supply Voltage Range
Input Optical Power (Damage Threshold)
V_CC
Pin,damage
1 _{Measured on top side of SFP+ module at the front center vent hole of the cage.}
2 _{Non condensing}
Minimum
- 40
-5
0
- 0.5
-
Maximum
+ 85
+ 70
85
+ 3.6
0
Units
°C
°C
%
V
dBm
An Oplink Company
S0260. Rev.01. 2011-12-23