S0241-TRPV3GET2C000E2G Datasheet, PDF (1/5 Pages) OPLINK Communications Inc. – 1310nm Dual Channel Optical Transmitter

1310nm Dual Channel Optical
Transmitter
TRPV3GET2C000E2G
Pb
Product Description
The TRPV3GET2C000E2G is a dual channel optical transmitter module
designed to transmit optical serial digital signals as defined in SMPTE 297-
2006. The module is specifically designed for robust performance in the
presence of SDI pathological patterns for SMPTE 259M, SMPTE 344M, SMPTE
292M and SMPTE 424M serial rates.
The SFP transmitter provides an excellent solution for transmission at 1310nm
to provide error-free transmission of signals from 50Mbps to 3Gbps over
single mode fiber. The product is RoHS 6/6 compliant and is designed and
tested in accordance with industry safety standards. The transceiver is Class I
laser product per U.S. FDA/CDRH and international IEC-60825 standards.
The TRPV3GET2C000E2G connects to standard 20-pad SFP connector and
supports hot-plug capability. This allows the system designer to make
configuration changes or maintenance by simply plugging in different
transceivers without removing the power supply from the host system.
The SFP transmitter also provides extensive operational status monitoring
through an I²C interface. Output optical power, bias current, supply voltage
and operating temperature are monitored. If a parameter monitored is
outside the pre-defined range, the alarm/warning flag associated with the
parameter will be raised.
Features
 Features two transmitters in one SFP package
 Multirate from 50Mbps to 3Gbps for up to 30km
single-mode fiber
 Maximum distance of 10km under worst case
conditions and 3Gbps video pathological
signals
 Supports video pathological patterns for SD-SDI,
HD-SDI and 3G-SDI
 Digital diagnostics and control via I²C interface
 Low power consumption (Typically 600mW)
 RoHS compliant
 SMPTE 297-2006 compatible
Absolute Maximum Ratings
Parameter
Symbol
Storage Temperature Range
T_ST
Case Operating Temperature ¹
“Commercial”
T_OP
Operating Relative Humidity ²
RH
Supply Voltage Range
V_CC
1 _{Measured on top side of SFP module at the front center vent hole of the cage.}
2 _{Non condensing}
Minimum
- 40
-5
0
- 0.5
Maximum
+ 100
+ 70
80
+ 3.6
Units
°C
°C
%
V
An Oplink Company
S0241. Rev.01. (web) 2012-04-25