OISS1310PS0311 Datasheet, PDF (1/2 Pages) OPLINK Communications Inc. – Mini Polarization Insensitive Fiber Isolator

Mini Polarization Insensitive
Fiber Isolator (Single Stage)
Mini OISS Series
Features
• Super Compact Size
• Low Insertion Loss
• Low Insertion Loss Variation
Over Wavelength
• High Power Handling
• Highly Stable & Reliable
• Epoxy-Free Optical Path
• 80 µm Fiber Pigtail Option
Mini Polarization Insensitive Fiber Isolator (Single Stage)
Oplink's state of the art, mini polarization-insensitive isolators offer the smallest
package size, 3.0×25mm, which saves 60% real estate comparing to standard
isolators, with excellent performance such as super low insertion loss, low
polarization dependent loss (PDL), low wavelength dependent loss
(WDL), and high isolation. Low PMD version is also available. It also
has a package option with 80mm reduced cladding fiber pigtail,
which results in small bending radius and low bending losses.
Oplink mini isolator can sustain high optical power
due to its optical path epoxy-free packaging. It is
qualified to Telcordia GR-1221 standards.
Applications
• EDFA & Raman Amplifiers
• Fiberoptic Instruments
• Fiberoptic Network links
• Transmitters and Fiber
Lasers
Oplink Fiber Optic
Product Lines
Amplifier Components
Amplifier Modules
DWDMs
Switching/Routing/
Monitoring/ Conditioning
Tra n s m is s io n
RGB Laser Modules
Oplink Communications, Inc.
Performance Specifications
Mini OISS Series
Operating Wavelength Range
Insertion Loss Max.^† (over operating wavelength range,0~70°C,all SOP)
Isolation Min. (over operating wavelength range,0~70°C,all SOP)
Wavelength Dependent Loss Max.
Return Loss ( Input / Output )
Polarization Dependent Loss (PDL) Max.
Polarization Mode Dispersion (PMD) Max^†
Maximum Power Handling
Operating Temperature
Storage Temperature
Fiber Type
P Grade
A Grade
1310 ± 15
1480 ± 15
1528 ~ 1564
or 1570 ~ 1605
Units
nm
0.35
0.40
dB
22
21
dB
0.1
0.1
dB
55/50
55/50
dB
0.05
0.10
dB
0.25
0.25
ps
2
W
0 to +70
°C
-40 to 85
°C
SMF-28, 250µm Bare Fiber
PureMode RC SMF-28 80µm
Package Dimension *
P3: (φ)3.0 x (L)25
mm
Values are referenced without connector loss.
* The mechanical tolerance should be +/- 0.2 mm on all package dimensions unless otherwise custom specified.
†
For Low PMD version, the PMD (max.) spec is 0.05 ps, and insertion loss spec is 0.05dB higher