MWDMGLSU00011H1 Datasheet, PDF (1/2 Pages) OPLINK Communications Inc. – L Band Supervisory Channel Micro-Optic WDM

Green L Band Supervisory Channel (1620-
1640 nm) Micro-Optic WDM
MWDMGLSU Series
Product Description
Oplink’s Micro-Optic Wavelength Division Multiplexer (MWDM) is based on
thin-film filter technology and patented athermal platform for optical device.
The MWDMLSU offers flat and wide passband, low insertion loss, and high iso-
lation, which make this device ideal for high-power Optical Amplification Sys-
tems and DWDM Network applications. Oplink MWDM devices are Bellcore
GR-1221 qualification tested and complied with industry green initiatives such
as Rohs and WEEE. All Oplink products are epoxy-free in the optical path.
Performance Specificationns
MWDMGLSU Series
Min Typical Max Unit
Pass Channel Wavelength Range λ1
1620
1640 nm
Reflection Channel Wavelength Range λ2
1400
1608 nm
Insertion Loss *
Pass Channel @ λ1
Reflect Channel @ λ2
0.8
0.6
dB
Isolation
Reflect Channel @ λ1
12
Pass Channel @ λ2
20
dB
Passband Ripple
0.30 dB
Directivity
50
dB
Return Loss
50
dB
Polarization Dependent Loss
0.1
dB
Polarization Mode Dispersion
0.05
ps
Maximum Power Handling
500 mW
Fiber Type
Corning SMF-28
Operating Temperature
0 to +70
°C
Storage Temperature
-40 to +85
°C
Package Dimensions ^** 250 μm Bare Fiber
900 μm Loose Tube
P1: (ø) 5.5 x (L) 34.0
P2: (ø) 5.5 x (L) 40.0
mm
Note:
* Values are referenced without connector loss.
** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom speci-
fied.
*** The maximum IL is under all states of polarization and within the full operating temperature and
wavelength ranges specified.
Features
 Environmental Green Plan
Compliance
 Wide Operating Wavelength Range
 Low Insertion Loss
 High Channel Isolation
 Ultra Flat Wide Passband
 Highly Stable & Reliable
 Epoxy-free Optical Path
Applications
 Fiberoptic Amplifiers
 System Monitoring
 Fiberoptic Instruments
 Laboratory R&D
R03.20081118