MWDMGCR Datasheet, PDF (1/2 Pages) OPLINK Communications Inc. – Micro-Optic WDM

Green C Band Red/Blue Pass Micro-Optic WDM
MWDMGCR/CB Series
Product Description
Oplink’s Micro-Optic Wavelength Division Multiplexer (MWDM) is based on
thin-film filter technology and patented athermal platform for optical device.
This device offers flat and wide passband, low insertion loss, and high isolation,
which make this device ideal for high-power Optical Amplification Systems and
DWDM Network applications. Oplink MWDM devices are Bellcore GR-1221
qualification tested and complied with industry green initiatives such as Rohs
and WEEE. All Oplink products are epoxy-free in the optical path.
Performance Specificationns
MWDMGCR/CB Series
Min
Typical
Max Unit
Type CR
Pass Channel Wavelength Range λ1
Type CB
1547.4
1530.0
1561.0 nm
1543.2 nm
Reflection Channel Wavelength
Range λ2
Type CR
Type CB
1530.0
1547.4
1543.2 nm
1561.0 nm
Insertion Loss *
Pass Channel @ λ1
Reflect Channel @ λ2
0.8
0.5
dB
Isolation
Reflect Channel @ λ1
12
Pass Channel @ λ2
20
dB
Passband Ripple
0.30
dB
Directivity
50
dB
Return Loss
50
dB
Polarization Dependent Loss
0.1
dB
Polarization Mode Dispersion
0.05
ps
Maximum Power Handling
500 mW
Fiber Type
Corning SMF-28
Operating Temperature
0 to +70
°C
Storage Temperature
-40 to +85
°C
Package Dimensions ^**
250 μm Bare Fiber
900 μm Loose Tube
P1: (ø) 5.5 x (L) 34.0
P2: (ø) 5.5 x (L) 40.0
mm
Note:
* Values are referenced without connector loss.
** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom
specified.
*** The maximum IL is under all states of polarization and within the full operating temperature and
wavelength ranges specified.
Features
 Environmental Green Plan
Compliance
 Wide Operating Wavelength Range
 Low Insertion Loss
 High Channel Isolation
 Ultra Flat Wide Passband
 Highly Stable & Reliable
 Epoxy-free Optical Path
Applications
 Fiberoptic Amplifiers
 System Monitoring
 Fiberoptic Instruments
 Laboratory R&D
S0033 - R03. 20100614