MWDMG15981000H1 Datasheet, PDF (1/2 Pages) OPLINK Communications Inc. – Micro-Optic WDM

Green 980/1550 nm Micro-Optic WDM
MWDMG1598 Series
Product Description
Oplink’s Micro-Optic Wavelength Division Multiplexer (MWDM) is based on
thin-film filter technology and metal bonding micro optics packaging. This
device offers very flat and wide passband, low insertion loss, and high isolation
which makes it ideal for combining pump(980nm) and signal light(1550nm) in
Optical Fiber Amplifier Systems. In DWDM systems, this component is used
in high-power applications. All Oplink products are epoxy-free in the optical
path. Oplink MWDM devices are Bellcore GR-1221 qualification tested.
Performance Specificationns
MWDMG1598 Series
Pass Channel Wavelength Range λ1
Reflection Channel Wavelength Range λ2
Insertion Loss *
Pass Channel @ λ1
Reflect Channel @ λ2
Isolation
Reflect Channel @ λ1
Pass Channel @ λ2
Passband Ripple
Directivity
Return Loss
Polarization Dependent Loss
Polarization Mode Dispersion
Maximum Power Handling
Operating Temperature
Storage Temperature
Fiber Type
Port 1 & 3
Port 2
Package Dimensions ^**
250 μm bare fiber
900 μm loose tube
Min
Max
1520
1610
965
995
1.0
0.6
18
30
0.2
55
50
0.1
0.05
500
0 to +70
-40 to +85
Corning Flexcore 1060
Corning SMF-28
P1: (ø) 5.5 x (L) 34.0
P2: (ø) 5.5 x (L) 40.0
Unit
nm
nm
dB
dB
dB
dB
dB
dB
ps
mW
°C
°C
mm
Note:
* All spec excluding connectors.
** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom speci-
fied.
*** The maximum IL is under all states of polarization and within the full operating temperature and
wavelength ranges specified.
Features
 Environmental Green Plan
Compliance
 Wide Operating Wavelength Range
 Low Insertion Loss
 High Channel Isolation
 Ultra Flat Wide Passband
 Highly Stable & Reliable
 Epoxy-free Optical Path
Applications
 Fiber Amplifiers
 WDM Systems
R01.20081107