|
MWDMG0050 Datasheet, PDF (1/2 Pages) OPLINK Communications Inc. – Micro-Optic WDM | |||
|
Green (1480 nm Plus Supervisory)/
1550 nm Micro-Optic WDM
MWDMG0050 Series
Product Description
Oplinkâs Micro-Optic Wavelength Division Multiplexer (MWDM) is based on
thin-film filter technology and patented athermal platform for optical device.The
MWDM device is used to combine (or separate) 1550 nm signals with (or from) a
1480 nm pump signal plus the1510 nm supervisory channel.This device offers very
flat and wide passband, low insertion loss, and high isolation which makes it ideal
for amplification, telecommunications and WDM network applications. Oplink
MWDM devices are Bellcore GR-1221 qualification tested and complied with
industry green initiatives such as Rohs and WEEE. All Oplink products are epoxy-
free in the optical path.
Performance Specificationns
MWDMG0050 Series
Pass Channel Wavelength Range λ1
Reflection Channel Wavelength Range λ2
Insertion Loss *
Pass Channel @ λ1
Reflect Channel @ λ2
Isolation
Reflect Channel @ λ1
Pass Channel @ λ2
Passband Ripple
Directivity
Return Loss
Polarization Dependent Loss
Polarization Mode Dispersion
Maximum Power Handling
Fiber Type
Operating Temperature
Storage Temperature
Package Dimensions **
250 μm Bare Fiber
900 μm Loose Tube
Min Typical Max
1465
1515
1540
1575
0.7
0.5
12
30
0.30
50
50
0.1
0.05
500
Corning SMF-28
0 to +70
-40 to +85
P1: (ø) 5.5 x (L) 34.0
P2: (ø) 5.5 x (L) 40.0
Unit
nm
nm
dB
dB
dB
dB
dB
dB
ps
mW
°C
°C
mm
Note:
* Values are referenced without connector loss.
** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom speci-
fied.
Features
ï² Environmental Green Plan
Compliance
ï² Wide Operating Wavelength Range
ï² Low Insertion Loss
ï² High Channel Isolation
ï² Ultra Flat Wide Passband
ï² Highly Stable & Reliable
ï² Epoxy-free Optical Path
Applications
ï² Fiberoptic Amplifiers
ï² System Monitoring
ï² Fiberoptic Instruments
ï² Laboratory R&D
S0026 - R03. 20100602
|
▷ |