LLCC-S0022 Datasheet, PDF (1/2 Pages) OPLINK Communications Inc. – Green Low Loss CWDM

Green Low Loss CWDM
LLCC Series
Product Description
Oplink’s Green Low Loss Coarse Wavelength Division Multiplexer is designed to
meet industrial stringent size and loss requirement. Based on Thin-Film-Filter (TFF)
and Micro-optics, this low loss CWDM features small form factor, ultra low insertion
loss, high channel isolation, and unparallel reliability. The technology is a lead-free
packaging platform and no epoxy in the optical path. The Green Low Loss CWDM
is Telcordia GR-1221and GR-1209 qualified, and complied with industry green initia-
tives such as RoHS and WEEE.
Performance Specificationns
LLCC Series
Center Wavelength λ_C
Channel Spacing
Channel Passband
1310 Express Passband
4ch CWDM
Insertion Loss
within Passband ¹⁾
8ch CWDM
CWDM Expansion (4ch CWDM
only)
1310 Express
Passband Ripple
Adjacent Channel Isolation
Non-adjacent Channel Isolation
1310 Express Isolation over CWDM Bands
CWDM Expansion Isolation over CWDM Bands (4ch
CWDM only)
Return Loss
Directivity
Polarization Dependent Loss (PDL)
Polarization Mode Dispersion (PMD)
Operating Power
Operating Temperature
Storage Temperature
Fiber Type
Package
Standard (250 or 900µm fiber jacket)
Dimensions ³⁾ _{Compact (250µm fiber jacket only)}
Min
Typical
Max
Refer to Channel Plan Below
20
13
15
1260
1360
0.8
1.0
1.0
1.5
1.0
1.3
0.6
0.8
0.3
0.5
30
40
45
50
40
45
13
15
45
50
55
0.20
0.20
300
-5 to +70
-40 to +85
Corning SMF-28
58.0 x 30.0 x9.6
52.0 x 27.5 x 7.6
Unit
nm
nm
nm
nm
dB
dB
dB
dB
dB
dB
dB
dB
dB
ps
mW
°C
°C
mm
Channel Plan
1471.0 1491.0
1511.0
1531.0
1551.0
1571.0
1591.0
1611.0
Features
 Small Form Factor
 Environmental Green Plan Compliance
 Ultra-Low Insertion Loss
 High Reliability
 High Channel Isolation
 Epoxy-Free Optical Path
 RoHS 6 Compliant
Applications
 WDM System for Metro/Access
Market
Notes:
[1] The maximum IL is under all states of polarization and
within the full operating temperature and wavelength ranges
specified.
[2] All the parameters are without connectors.
[3] The mechanical tolerance should be +/-0.2mm on all
package dimensions unless otherwise custom specified
S0022 - R06. (web) 20130104