DTR1250SMGBH8HSCWDMMR Datasheet, PDF (1/5 Pages) OPLINK Communications Inc. – Multi-rate 5V Very Long Haul CWDM GBIC Transceivers

Description
The DTR-1250-SM-GB-H8-HS-CWDM-MR product
family of multi-rate GBICs provides a very long haul,
single mode solutions for 1000BASE-LX Gigabit Ethernet
and 1.062GBd Fibre Channel ports in a networking
switch. The transceivers are designed to support data rates
ranging from 1250Mb/s down to 125Mb/s and are available
in eight (8) wavelengths: 1470nm, 1490nm, 1510nm,
1530nm, 1550nm, 1570nm, 1590nm and 1610nm. The
transceivers use a 1550nm DFB laser and an ultra high
sensitivity Avalanche Photodiode (APD) receiver to provide
a minimum optical link power budget of 33dB which
corresponds to a transmission distance of 120km, assuming
a total connector/splice/CWDM mux and demux loss of
DTR-1250-SM-GB-H8-HS-
CWDM-MR
Multi-rate 5V Very Long Haul CWDM
GBIC Transceivers
Features
; Up to 120km with Single Mode Fiber
; APD Receiver
; Eight (8) Wavelength CWDM Transceivers
; Compliant with GBIC Specification, Rev. 5.5
; Compatible with IEEE 802.3z 1000BASE-LX
Specifications for Gigabit Ethernet
; Compatible with 1.062GBd Fibre Channel
100-SM-LC-L FC-PI Standards
; Compatible with Optical Interface Requirements in
Annex F of GBIC Specification, Rev. 5.5
; Compliant with GBIC Serial Module Definition
Protocol (Module Definition 4 in Annex D)
; Hot-pluggable
; Excellent EMI & ESD Protection
; Eye Safe (Class I and 1M Laser Safety)
; Duplex SC Optical Interface
4.6dB, allocated system penalty of 2dB and fiber loss of
0.22dB/km. All transceivers are Class I Laser products per
U.S. FDA/CDRH and Class 1M Laser products per
international IEC-60825 standards.
The DTR-1250-SM-GB-H8-HS-CWDM-MR transceivers
connect to standard 20-pad GBIC connectors for hot plug
capability. This allows the system designer to make
configuration changes or maintenance by simply plugging
in different types of GBICs without removing the power
supply from the host system.
The transceivers operate from a single +5V power supply
over an operating case temperature range of -5°C to +70°C.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature
Supply Voltage
Maximum Input Optical Power (30 seconds max.)
Symbol
T_st
T_op
V_DD
P_{in, max}
Minimum
- 40
-5
0
-
Maximum
+ 85
+ 70
+ 7.0
+ 3.0
Units
°C
°C
V
dBm
Optical Communication Products, Inc.
1
21737-0609, Rev. C
04/05/2006