DTR-622-SM-LC-A-HP-ST Datasheet, PDF (1/7 Pages) OPLINK Communications Inc. – Multi-rate OC-12/STM-4 Single mode SFF Transceivers

OCP
DTR-622-SM-LC/LS-MR
Multi-rate OC-12/STM-4 Single mode SFF Transceivers
Features
Designed for Multi-rate OC-3 (155Mb/s) &
OC-12 (622Mb/s) data rates
Long Reach 1310nm (40km distance) and
1550nm (80km) as well as Intermediate
Reach (15km)
Eye Safe (Class I Laser Safety)
Multi-sourced 10-pin (2x5) SFF (Small Form
Factor) package style
Duplex LC optical connector interface
Excellent EMI & ESD protection
Single +3.3V power supply &
LV-PECL DATA interface
Description
The DTR-622-SM-LC-MR and DTR-622-SM-LS-MR fiber
optic transceivers offer a simple, convenient way to
interface PCBs to single mode fiber optic cables. These
multi-rate transceivers are designed with performance
versions that are fully compliant with SONET/SDH standards
for OC-12/STM-4 data rate for Short Reach (12/2 km),
Intermediate Reach (21/15 km) and Long Reach
(42/40 km and 85/80 km) specifications. The modules also
operate down to OC-3/STM-1 data rate. All modules satisfy
Class I Laser Safety requirements in accordance with the
US FDA/CDRH and international IEC-825 standards.
The transmit and receive functions are contained in a narrow
width two-row, 10-pin (2x5) package with a Duplex LC
connector interface. The receptacle fits into an RJ-45 form
Absolute Maximum Ratings
Option for LV-TTL or LV-PECL SIGNAL
DETECT output
factor outline. The 10-pin configuration is in conformance
to a Small Form Factor (SFF) multisource transceiver
agreement.
The transmitter incorporates a highly reliable 1300 nm or
1550 nm InGaAsP Laser and a driver circuit which converts
LV-PECL data to light. A LV-TTL Transmitter Disable
control input is also provided. The receiver features a
transimpedance amplifier IC with internal AGC for high
sensitivity and wide dynamic range. The Signal Detect
status output can be either LV-TTL or LV-PECL.
The transceiver operates from a single +3.3V power supply
over an operating temperature range of - 5°C to +70°C or
- 40°C to +85°C (“A” option). The package is made of
metal for excellent EMI shielding
Parameter
Storage Temperature
Operating Case
Temperature
"A" option
"B" option
Supply Voltage
Input Voltage
Output Current
Lead Soldering Temperature & Time
Symbol
T_st
T_op
V_CC
V_in
I_O
-
Minimum
- 40
- 40
-5
0
0
-
-
Maximum
Units
+ 85
°C
+ 85
°C
+ 70
+ 6.0
V
V_CC
V
50
mA
260°C, 10 sec
Optical Communication Products, Inc.
1
21737-0375, Rev. B
06-12-2003