CP21C0XSRC000XG Datasheet, PDF (1/1 Pages) OPLINK Communications Inc. – 100G-SR10 CFP2 Transceiver

100G-SR10 CFP2 Transceiver
CP21C0XSRC000xG
Pb
Product Description
The CP21C0XSRC000xG is a hot pluggable fiber optic transceiver in the CFP2
form factor with digital diagnostics monitoring functionality (DDM) and control
functions. Supporting 100GBase-SR10 Ethernet standard and OTU4 data rates
makes it ideally suited for 100G applications where cost effective high port
density is needed. It offers doubled port density of 100G-SR10 CFP transceivers.
The control and status reporting functions are integrated into the design via
a set of non-data hardware signal pins and Management Date Input/Output
(MDIO) interface per the CFP2 Multi-Source Agreement.
The transceiver supports an aggregate bandwidth of 100G over 100 meters
of optical fiber. Each lane transmits and receives data streams at data rates up
to 11.1809Gbps. The CFP transceiver has a single MPO port which connects
to an industry standard 2x12 multi-mode fiber cable. It provides an excellent
solution for 100GbE/OTU4 data transmission at 850nm over up to 100m
multimode mode ribbon cables. The low power consumption and excellent
EMI performance enable system design with high port density. The product
is designed and tested in accordance with industry safety standards. The
transceiver is Class I Laser product per U.S. FDA/CDRH and IEC 60825-1:2007 &
IEC 60825-2:2004+A1+A2 standards.
The CP21C0XSRC000xG transceiver connects to standard 104-pin CFP2
connectors for hot plug capability. This allows system designers to make
configuration changes or maintenance by simply plugging in different
transceivers without removing the power supply from the host system. The
transmitter and receiver DATA interfaces are internally AC-coupled. LV-CMOS
Transmitter Disable control input and Loss of Signal (LOS) output interfaces are
also provided.
The transceiver can be conveniently assembled into and released from the host
system through the latch.
The transceiver operates from a single +3.3V power supply over an operating
case temperature range of -5°C to +70°C. The housing is made of metal for EMI
immunity.
Features
 Integrated 10 independent full duplex lanes
 Transmission distance up to 100m (OM4 fiber)
 CFP2 form factor for doubled port density than
CFP
 Compliant to 100Gbase-SR10 specifications
 Support data transmission up to 111.809Gb/s
 Support CAUI proposals
 Status reporting and control functions through
the MDIO interface
 RoHS 6/6 compliant
 Laser Class 1 IEC/CDRH compliant
Ordering Information
Model Name
CP21C0XSRC000E1G
CP21C0XSRC000E2G
Operating Temperature
- 5°C to +70°C
- 5°C to +70°C
Commercial
Commercial
Nominal
Wavelength
850
850
Supported Data Rate
(Gb/s)
103.125
103.125 and 111.809
Distance
100m
100m
Latch
Color
Beige
Beige
S0434. Rev.01 (web). 2014-05-16
CONTACT  46335 Landing Pkwy  Fremont  CA  94538  TEL : [phone]  FAX : [phone]  EMAIL : [e-mail]  www.OPLINK.com 