NLX1G99_16 Datasheet, PDF (9/15 Pages) ON Semiconductor – Configurable Multifunction Gate

NLX1G99
AC ELECTRICAL CHARACTERISTICS (Input t_r = t_f = 3.0 ns)
Symbol
t_PLH,
t_PHL
Parameter
Propagation
Delay, Any
Input to Output
Y (See Test
Circuit)
V_CC (V)
1.65−1.95
2.3 − 2.7
3.0 − 3.6
4.5 − 5.5
Test Condition
Refer to switch
positions and loading
conditions in
Figure 17 to 21.
T_A = 255C
Min Typ Max
4.3 12.8 25.1
2.4 7.1 10.2
1.7 5.2 6.7
1.3 4.0 4.5
T_A v +855C
Min Max
4.3 25.1
2.4 10.2
1.7 6.9
1.3 4.9
T_A = −555C
to +1255C
Min Max Unit
4.3 25.1 ns
2.4 10.2
1.7 7.0
1.3 5.0
t_EN
Output Enable 1.65−1.95
Refer to switch
3.4
Time, OE to Y
2.3 − 2.7 positions and loading 2.1
3.0 − 3.6
conditions in
1.3
4.5 − 5.5
Figure 17 to 21.
1.0
24.7 3.4 24.7 3.4 24.7 ns
11 2.1 12 2.1 12.2
7.5 1.3 8.0 1.3 8.3
5.7 1.0 6.2 1.0 6.5
t_DIS
Output Disable 1.65−1.95
Refer to switch
4.0
Time, OE to Y
2.3 − 2.7 positions and loading 2.7
3.0 − 3.6
conditions in
3.5
4.5 − 5.5
Figure 17 to 21.
2.0
15.5 4.0 15.5 4.0 15.5 ns
7.5 2.7 7.5 2.7 7.5
7.0 3.5 7.0 3.5 7.0
5.5 2.0 5.5 2.0 5.5
t_PLH,
t_PHL
t_EN
Propagation
1.65−1.95
Refer to switch
4.3 13.6 25.7 4.3 25.7 4.3 25.7 ns
Delay, Any
2.3 − 2.7 Positions and loading 2.5 7.8 10.7 2.5 10.7 2.5 10.7
Input to Output 3.0 − 3.6
conditions in
2.3 5.6 7.6 2.3 7.6 2.3 7.6
Y (See Test
4.5 − 5.5
Figure 22 to 26.
1.6 4.4 5.2 1.6 5.2 1.6 5.2
Circuit)
Output Enable
Time, OE to Y
1.65−1.95
Refer to switch
4.2
2.3 − 2.7 Positions and loading 2.4
3.0 − 3.6
conditions in
2.0
4.5 − 5.5
Figure 22 to 26.
1.7
25.2 4.2 25.2 4.2 25.2 ns
11.3 2.4 12.2 2.4 13
8.0 2.0 8.5 2.0 8.7
6.0 1.7 6.5 1.7 6.7
t_DIS
Output Disable 1.65−1.95
Refer to switch
3.7
Time, OE to Y
2.3 − 2.7 Positions and loading 2.0
3.0 − 3.6
conditions in
2.1
4.5 − 5.5
Figure 22 to 26.
1.0
15
3.7
15
3.7
15
ns
6.5 2.0 6.7 2.0 6.9
5.6 2.1 5.8 2.1 5.9
4.5 1.0 4.7 1.0 4.9
C_IN
Input
3.3
3.5
pF
Capacitance
C_O
Output
3.3
6.0
pF
Capacitance
C_PD
Power
3.3
f = 10 MHz
22
pF
Dissipation
Capacitance
(Note 6)
6. C_PD is defined as the value of the internal equivalent capacitance which is calculated from the dynamic operating current consumption without
load. Average operating current can be obtained by the equation I_CC(OPR) = C_PD • V_CC • f_in + I_CC. C_PD is used to determine the no−load
dynamic power consumption: P_D = C_PD • V_CC2 • f_in + I_CC • V_CC.
www.onsemi.com
9