LB11696VGEVB Datasheet, PDF (9/17 Pages) –

Continued from preceding page.
Pin No. Pin Name
LB11696V
Pin Description
VREG
26
N1 Hall signal output (HP signal) type selector
Equivalent circuit
50 kΩ
300 Ω
26
27
N2
Hall signal output (HP signal) type selector
VREG
50 kΩ
300 Ω
27
Undervoltage protection voltage detection
28
LVS
If a 5 V or higher supply voltage is to be detected, set the
detection voltage by inserting an appropriate zener diode
in series.
V_CC
Stabilized power supply output (5 V output)
29
VREG Insert a capacitor (about 0.1 µF) between this pin and
ground for stabilization.
V_CC
28
29
30
V_CC
Power supply. Insert a capacitor between this pin and
ground for stabilization.
Page. 9