CAT811LTBI Datasheet, PDF (9/9 Pages) ON Semiconductor – 4-Pin Microprocessor Power Supply Supervisors with Manual Reset

CAT811, CAT812
ORDERING INFORMATION
Order Number
NiPdAu
Matte−Tin
CAT811LTBI−GT3 CAT811LTBI−T3
CAT811MTBI−GT3
CAT811JTBI−GT3
CAT811MTBI−T3
CAT811JTBI−T3
CAT811TTBI−GT3 CAT811TTBI−T3
CAT811STBI−GT3 CAT811STBI−T3
CAT811RTBI−GT3 CAT811RTBI−T3
CAT811ZTBI−GT3 CAT811ZTBI−T3
Voltage
4.63 V
4.38 V
4.00 V
3.08 V
2.93 V
2.63 V
2.32 V
Top Mark (Note 4)
NiPdAu
VEA
VEA
VEA
VEA
VEA
VEA
VEA
Matte−Tin
VES
VES
VES
VES
VES
VES
VES
Output
Manual
Reset
Reset
Package
Quantity
per Reel
(Note 5)
LOW SOT−143−4 3,000
CAT812LTBI−GT3 CAT812LTBI−T3 4.63 V
VTA
VTS
CAT812MTBI−GT3 CAT812MTBI−T3 4.38 V
VTA
VTS
CAT812JTBI−GT3 CAT812JTBI−T3 4.00 V
VTA
CAT812TTBI−GT3 CAT812TTBI−T3 3.08 V
VTA
CAT812STBI−GT3 CAT812STBI−T3 2.93 V
VTA
VTS
VTS
Manual
Reset
HIGH SOT−143−4 3,000
VTS
CAT812RTBI−GT3 CAT812RTBI−T3 2.63 V
VTA
VTS
CAT812ZTBI−GT3 CAT812ZTBI−T3 2.32 V
VTA
VTS
4. Threshold and full part numbers will be provided on box and reel labels as well as all Shipping documents.
5. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
6. For detailed information and a breakdown of device nomenclature and numbering systems, please see the ON Semiconductor Device
Nomenclature document, TND310/D, available at www.onsemi.com
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [e-mail]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: [phone]
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
http://onsemi.com
9
CAT811/D