LMV981_15 Datasheet, PDF (8/21 Pages) Texas Instruments – LMV981 SINGLE, LMV982 DUAL 1.8-V OPERATIONAL AMPLIFIERS WITH RAIL-TO-RAIL INPUT AND OUTPUT AND SHUTDOWN

LMV981, LMV982
5V DC ELECTRICAL CHARACTERISTICS Unless otherwise noted, all min/max limits are guaranteed for T_A = 25°C, V⁺ = 5 V,
V^− = 0 V, V_CM = V+/2, V_O = V⁺/2 and R_L > 1 MW. Typical specifications represent the most likely parametric norm.
Parameter
Symbol
Condition
Min
Typ
Max
Unit
Output Short−Circuit
I_O
Sourcing, Vo = 0 V, V_IN = +100 mV
40
60
mA
Current
−40°C to +125°C
40
Sinking, Vo = 5 V, V_IN = −100 mV
−40°C to +125°C
45
65
45
Shutdown Enable
Control
V_SHDN
Turn−on Voltage to Enable Device
Turn−off Voltage to Shutdown Device
4.2
V
0.55
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
8. Guaranteed by design and/or characterization.
5V AC ELECTRICAL CHARACTERISTICS Unless otherwise specified, all limits are guaranteed for T_A = 25°C, V+ = 5 V, V− =
0 V, V_CM = 2.0 V,Vo = V+/2 and R_L > 1 MW. Typical specifications represent the most likely parametric norm.
Parameter
Symbol
Condition
Min
Typ
Max
Unit
Slew Rate
SR
(Note 9)
0.48
V/uS
Gain Bandwidth
Product
GBWP
1.5
MHz
Phase Margin
Qm
65
°
Gain Margin
Gm
8
dB
Input−Referred
e_n
Voltage Noise
f = 50 kHz, V_CM = 2 V
50
nV/√Hz
Total Harmonic
Distortion
THD
f = 1 kHz, A_V = +1, R_L = 600 W, V_O = 1 V_PP
0.022
%
Amplifier−to−
Amplifier Isolation
(Note 10)
123
dB
9. Connected as voltage follower with input step from V− to V+. Number specified is the slower of the positive and negative slew rates.
10. Input referred, R_L = 100 kW connected to V+/2. Each amp excited in turn with 1 kHz to produce V_O = 3 V_PP. (For Supply Voltages < 3 V,
V_O = V+).
www.onsemi.com
8