CM1233 Datasheet, PDF (8/13 Pages) California Micro Devices Corp – PicoGuard XSTM eXtreme Speed ESD Clamp Array For High Speed Data Line Protection

CM1233
ELECTRICAL OPERATING CHARACTERISTICS ^{(SEE NOTE 1)}
SYMBOL PARAMETER
V_IN
I/O Voltage Relative to GND
I_IN
Continuous Current through signal pins
(IN to OUT) 1000 Hr
CONDITIONS
I_F
Channel Leakage Current
T_A = 25°C; V_IN = 5V
V_ESD ESD Protection - Peak Discharge Voltage
at any channel input, in system:
Contact discharge per IEC 61000-4-2
Standard
T_A = 25°C
I_RES
Residual ESD Peak Current on RDUP
IEC 61000-4-2 8kV;
(Resistance of Device Under Protection) RDUP = 5Ω T_A = 25°C;
See Figure 6
V_CL
Channel Clamp Voltage
I_PP = 1A, T_A = 25°C,
(Channel clamp voltage per IEC 61000-4- _{tP = 8/20µS}
5 Standard)
Positive Transients
Negative Transients
R_DYN Dynamic Resistance
Positive Transients
Negative Transients
I_PP = 1A, T_A = 25ºC
,
t_P = 8/20µS
Zo
Differential Channels pair characteristic T_R = 200ps
impedance
MIN TYP MAX UNITS
-0.5
5.5
V
100
mA
±0.1 ±1.0 µA
±8
kV
3.2
A
+10
V
–1.8
V
0.9
Ω
0.55
Ω
100
Ω
∆Zo Channel-to-Channel Impedance Match
(Differential)
T_R = 200ps
2
%
Z
CHANNEL
Individual Channel Characteristic Imped-
ance in Single-ended Connection
T_R = 200ps
50
Ω
∆Z_CHANNEL Channel-to-Channel Impedance Match
(Individual)
T_R = 200ps
2
%
Note 1: All parameters specified at T_A = –40°C to +85°C unless otherwise noted.
Rev. 2 | Page 8 of 13 | www.onsemi.com