STK5DFU350D-E Datasheet, PDF (7/15 Pages) ON Semiconductor – 2-in-1 PFC and Inverter Intelligent Power Module (IPM)

STK5DFU350D-E
ELECTRICAL CHARACTERISTICS at Tc = 25C, VD1, VD2, VD3, VD4=15V (Note 7)
Parameter
PFC Section
Collector-emitter cut-off current
Reverse leakage current (PFC Diode)
Collector-emitter saturation voltage
Diode forward voltage (PFC Diode)
Junction to case thermal resistance
Switching characteristics
Switching time
Diode reverse recovery time
Inverter section
Collector-emitter leakage current
Bootstrap diode reverse current
Collector to emitter saturation voltage
Diode forward voltage
Junction to case thermal resistance
Switching time
Turn-on switching loss
Turn-off switching loss
Total switching loss
Turn-on switching loss
Turn-off switching loss
Total switching loss
Diode reverse recovery energy
Diode reverse recovery time
Reverse bias safe operating area
Short circuit safe operating area
Test Conditions
VCE = 600 V
VR = 600 V
Ic = 12 A, Tj = 25°C
Ic = 6 A, Tj = 100°C
IF = 12 A, Tj = 25°C
IF = 6 A, Tj = 100°C
IGBT(Q1)
FRD1(D1)
Ic = 12 A, VP = 300 V, Tj = 25C
VCE = 600 V
VR(BD) = 600 V
Ic = 8 A, Tj = 25C
Ic = 4 A, Tj = 100C
IF = 8 A, Tj = 25C
IF = 4 A, Tj = 100C
IGBT
Ic = 8 A, VP = 300 V, Tj = 25C
Ic = 8 A, VCC = 300 V, Tj = 25C
Ic = 4 A, VCC = 300 V, Tj = 100C
Ic = 8 A, VCC = 300 V, Tj = 25C
(di/dt set by internal driver)
Ic = 16 A, VCE = 450 V
VCE = 400 V
Symbol Min
Typ
Max Unit
ICE
-
IR
-
VCE(sat)
-
-
VF1
-
-
θj-c(T)
-
θj-c(D)
-
-
100
μA
-
100
μA
1.8
2.2
V
1.5
-
2.5
3.0
V
1.9
-
-
3.2
°C/W
-
4.6
tON
tOFF
trr
-
0.5
-
μs
-
1.1
-
μs
-
180
-
ns
ICE
-
-
IR(BD)
-
-
-
2.1
VCE(sat)
-
1.8
-
2.0
VF
-
1.6
θj-c(T)
-
-
t_ON
-
0.7
t_OFF
-
0.9
E_ON
-
770
E_OFF
-
200
E_TOT
E_ON
-
970
-
350
E_OFF
-
110
E_TOT
-
460
E_REC
-
130
trr
-
180
RBSOA
Full
Square
-
SCSOA
4
-
100
μA
100
μA
2.6
V
-
V
2.5
V
-
V
7.8
C/W
-
μs
-
μs
-
μJ
-
μJ
-
μJ
-
μJ
-
μJ
-
μJ
-
μJ
-
ns
-
μs
7. Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted.
Product performance may not be indicated by the Electrical Characteristics if operated under different conditions.
www.onsemi.com
7