CM2020-00TR_11 Datasheet, PDF(7/9 Page) ON Semiconductor – HDMI Transmitter Port Protection and Interface Device

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

CM2020-00TR_11 Datasheet, PDF (7/9 Pages) ON Semiconductor – HDMI Transmitter Port Protection and Interface Device

◁

CM2020â00TR

APPLICATION INFORMATION

LAYOUT NOTES

NOTE 1) Differential TMDS Pairs should be

designed as normal 100W HDMI microstrip.

Single Ended TMDS traces underneath CM2020

and between CM2020 and Connector should be

tuned to match chip/connector parasitics. (See

MediaGuard] Application Notes.)

NOTE 2) Level Shifter signals should be biased

with a weak pullup to the desired local

LV_SUPPLY. If the local ASIC includes sufficient

pullups to register a logic high when the CM2020

NFET is âoffâ, then external pullups are not needed

NOTE 3) Place CM2020 as close to conector as possible,

and as with any controlled impedance line avoid ANY

silkscreening over TMDS lines.

NOTE 4) CEC pullup isolation. The 27k RCEC

and a Schottky DCEC provide the necessary

isolation for the CEC pullup.

Figure 3. Typical Application for CM2020â00TR

http://onsemi.com

▷