CM1234 Datasheet, PDF (7/13 Pages) California Micro Devices Corp – PicoGuard XSTM ESD Clamp Array For High Speed Data Line Protection

CM1234
Specifications
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
Operating Temperature Range
Storage Temperature Range
Breakdown Voltage
(Positive)
RATING
-40 to +85
-65 to +150
6
*Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
UNITS
°C
°C
V
ELECTRICAL OPERATING CHARACTERISTICS ^{(SEE NOTE 1)}
SYMBOL PARAMETER
V_IN
I/O Voltage Relative to GND
I_IN
Continuous Current through signal pins
(IN to OUT) 1000 Hr
CONDITIONS
I_F
Channel Leakage Current
T_A = 25°C; V_N = 0V, V_TEST = 5V
V_ESD ESD Protection - Peak Discharge Voltage
at any channel input, in system:
a) Contact discharge per IEC 61000-4-2
Standard
and
T_A = 25°C
b) Air discharge per IEC 61000-4-2 Stan- T_A = 25°C
dard
I_RES
Residual ESD Peak Current on RDUP
IEC 61000-4-2 8kV;
(Resistance of Device Under Protection) RDUP = 5Ω T_A = 25°C;
MIN TYP MAX UNITS
-0.5
5.5
V
100
mA
0.1 1.0 µA
±15
kV
±20
kV
2.5
A
V_CL
Channel Clamp Voltage
I_PP = 1A, T_A = 25°C,
(Channel clamp voltage per IEC 61000-4- _{tP = 8/20µS}
5 Standard)
Positive Transients
Negative Transients
R_DYN Dynamic Resistance
Positive Transients
Negative Transients
I_PP = 1A, T_A = 25ºC;
t_P = 8/20µS
Zo
Differential Channels pair characteristic T_R = 200ps
impedance
+9
V
–1.5
V
0.44
Ω
0.38
Ω
100
Ω
Rev. 3 | Page 7 of 13 | www.onsemi.com