LC898111AXB-MH Datasheet, PDF (6/7 Pages) ON Semiconductor – OIS Controller & Driver

Ball
No
F8
F7
F6
F5
F4
F3
F2
F1
E8
E7
E6
E5
E4
E3
E2
E1
D8
D7
D6
D5
D4
D3
D2
D1
C8
C7
C6
C5
C4
C3
C2
C1
B8
B7
B6
B5
B4
B3
B2
B1
A8
A7
A6
A5
A4
A3
A2
A1
Pin Name
OUT4
VM
BUSY1
BUSY2
DVDD30
EPSOIF
HLXBO
OPTESTO
OUT3
MON
TEST
HLYBO
DAOPVSS
DAOPVDD
OPINMY
OPINPY
OUT2
CLKSEL
DVSS
OPINMX
OPINPX
ADVRL
ADVRH
ADVDD
OUT1
DGMOSI
TSTCLK
ZRESET
SAD4
HYI
GYXI
ADVSS
PGND
DGMISO
LDSTBB
LDOPO
SSB
EPCSBIF2
DVSS
GYYI
DGSSB
DGINT
DGSCLK
DVDD30
MISO
I2CCK
I2CDT
HXI
LC898111AXA, LC898111AXB
typ I : INPUT, O : OUTPUT, B : BIDIRECTION, P : Power, GND
type
Description
O Driver Output
P Driver VDD (2.6V to 3.6V)
EEPROM I/F (at I²C type EEPROM ) / BUSY1(O)
B
/ General-purpose IOPORT(B) / inner signal Monitor(O)
B BUSY2(O) / General-purpose IOPORT(B) / inner signal Monitor(O)
P Logic IO VDD (2.6V to 3.6V)
I EEPROM I/F
O Hall-X Bias (Current Drive)
O OpAmp Test out
O Driver output
B inner signal monitor / General-purpose IOPORT
I SPI & External clock case sets “1” other cases set “0”
O Hall-Y Bias (Current Drive)
P DA&Opamp VSS
P DA&Opamp VDD (2.6V to 3.6V)
I Hall-Y OpAmp input
I Hall-Y OpAmp input+
O Driver Output
I change pin of OSC(0) and External clock(1)
P Logic GND
I Hall-X OpAmp input
I Hall-X OpAmp input+
I ADC Reference Voltage Low input
I ADC Reference Voltage High input
P AD VDD (2.6V to 3.6V)
O Driver Output
B Digital Gyro (4-wire)IF data(O) / HPS Control(O) / General-purpose IOPORT(B)
I CLKSEL=1 : External Clock, CLKSEL=0 : change pin of I²C(0) and SPI(1)
I Hard Wafer Reset
I General-purpose AD input
I Hall-Y AD input
I Gyro-X AD input
P AD GND
P Driver GND
B Digital Gyro SPI IF Data( I ) / Digital Gyro I²C IF Data(B)
I LDO Standby (0 : Standby On, 1 : Standby Off)
P LDO Power supply out (Logic Core VDD (1.14V to 1.26V))
I SPI I/F Chip Select / VDD fix at I²C i/f
B EEPROM I/F
P Logic GND
I Gyro-Y AD input
Digital Gyro SPI IF Chip Select(O) / inner signal monitor(O) / General-purpose
B
IOPORT(B)
Digital Gyro SPI IF Data Busy( I ) / inner signal monitor(O) / General-purpose
B
IOPORT(B)
Digital Gyro SPI IF clock (O) / Digital Gyro I²C IF clock(O) /
B
HPS Control 1(O) / General-purpose IOPORT (B)
P Logic IO VDD (2.6V to 3.6V) and power supply to LDO
O SPI I/F Data / General-purpose IOPORT / inner signal monitor
I I²C_IF clock / SPI IF clock
B I²C_IF Data(B) / SPI IF Data
I Hall-X AD input
No.A2189-6/7