NCP380HMU05AGEVB Datasheet, PDF (5/23 Pages) ON Semiconductor – Fixed/Adjustable Current‐Limiting Power‐Distribution Switches

NCP380, NCV380
Table 4. ELECTRICAL CHARACTERISTICS (continued)
(Min & Max Limits apply for T_A between −40°C to +85°C and T_J up to +125°C for V_IN between 2.5 V to 5.5 V (Unless otherwise noted).
Typical values are referenced to T_A = +25°C and V_IN = 5 V.)
Symbol
Parameter
Conditions
Min Typ Max Unit
FLAG PIN
V_OL
I_LEAK
T_FLG
FLAG Output Low Voltage
Off-state Leakage
FLAG Deglitch
I_FLAG = 1 mA
400 mV
V_FLAG = 5 V
1.0
mA
FLAG De-assertion Time due to Overcurrent or
4.0
6.0
9.0
ms
Reverse Voltage Condition
T_FOCP FLAG Deglitch
THERMAL SHUTDOWN
FLAG Assertion due to Overcurrent
6.0
8.0
12
ms
T_SD
T_SDOCP
T_RSD
Thermal Shutdown Threshold
Thermal Regulation Threshold
Thermal Shutdown Rearming
Threshold
140
°C
125
°C
115
°C
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
10. Parameters are guaranteed for C_LOAD and R_LOAD connected to the OUT pin with respect to the ground, See Figure 3.
11. Adjustable current version, R_ILIM tolerance ±1%.
12. Fixed current version.
13. Not production test, guaranteed by characterization.
VIN
1 mF
IN
OUT
NCP380
C_LOAD
R_LOAD
V_EN
V_EN
V_OUT
GND
Figure 3. Test Configuration
50%
T_R
T_OFF
T_ON
90%
10%
V_OUT
Figure 4. Voltage Waveform
T_F
90%
10%
10%
www.onsemi.com
5