NB6L11 Datasheet, PDF (5/12 Pages) ON Semiconductor – 2.5V / 3.3V MULTILEVEL INPUT TO DIFFERENTIAL LVPECL/LVNECL 1:2 CLOCK OR DATA FANOUT BUFFER / TRANSLATOR

NB6L11
Table 5. DC CHARACTERISTICS, PECL V_CC = 3.3 V, V_EE = 0 V (Note 9)
−40°C
25°C
85°C
Symbol
Characteristic
Min Typ
I_EE
Negative Power Supply Current (Note 10)
5
14
V_OH
Output HIGH Voltage (Note 11)
2150 2250
V_OL
Output LOW Voltage (Note 11)
1430 1550
DIFFERENTIAL INPUT DRIVEN SINGLE−ENDED (Figures 10, 12)
Max
20
2350
1670
Min
5
2200
1480
Typ Max
14 20
2300 2400
1600 1720
Min
5
2250
1530
Typ Max Unit
14 20 mA
2350 2450 mV
1650 1770 mV
V_th
Input Threshold Reference Voltage Range 1125
(Note 7)
V_CC 1125
−75
V_CC 1125
−75
V_CC mV
−75
V_IH
Single−Ended Input HIGH Voltage
V_th
V_CC
V_th
V_CC
V_th
V_CC mV
+75
+75
+75
V_IL
Single−Ended Input LOW Voltage
V_EE
V_th
V_EE
V_th
V_EE
V_th mV
−75
−75
−75
DIFFERENTIAL INPUTS DRIVEN DIFFERENTIALLY (Figures 11, 13)
V_IHD
V_ILD
Differential Input HIGH Voltage
Differential Input LOW Voltage
1200
V_EE
V_CC
V_CC
−75
1200
V_EE
V_CC
V_CC
−75
1200
V_EE
V_CC mV
V_CC mV
−75
V_CMR
Input Common Mode Range
1163
(Differential Cross−Point Voltage) (Note 8)
V_CC 1163
−38
V_CC 1163
−38
V_CC mV
−38
V_ID
Differential Input Voltage (V_IHD − V_ILD)
75
2500 75
2500 75
2500 mV
I_IH
Input HIGH Current
D
50 150
D
10 150
50 150
10 150
50 150 mA
10 150
I_IL
Input LOW Current
D −150 −5
−150 −5
−150 −5
mA
D ^{−150 −30}
−150 −30
−150 −30
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification
limit values are applied individually under normal operating conditions and not valid simultaneously.
7. V_th is applied to the complementary input when operating in single−ended mode.
8. V_CMR minimum varies 1:1 with V_EE, V_CMR maximum varies 1:1 with V_CC.
9. Input and output parameters vary 1:1 with V_CC. V_EE can vary +0.3 V to −2.2 V.
10. All input and output pins left open.
11. All loading with 50 W to V_CC − 2.0 V.
http://onsemi.com
5